Zoning guide
Types of Industrial Zoning: M-1, M-2, M-3, I-1, I-2, LI, HI and Business Parks Explained
How industrial zoning tiers work, what M-1, M-2, M-3, I-1, I-2, LI, HI, IP, and BP usually mean, what separates light from heavy industrial, how to tell which ladder a city uses, and how to check a parcel for warehouse, outdoor storage, flex, or self-storage.
Industrial zoning codes sort land into tiers, from light industrial districts that look like business parks to heavy districts where almost any industry can locate. The letters vary: M for manufacturing, I for industrial, or two-letter labels such as LI and HI. The number or second letter usually tells you the tier, but not always. This guide explains how the tiers work, what each common label usually means, and how to check the district on a parcel before you rely on it.
For retail, office, and commercial districts, see our commercial zoning types guide.
How industrial tiers work
Most codes have two to five industrial districts. The lightest allows warehousing, distribution, flex space, and light manufacturing, mostly inside buildings. Each step up allows more outdoor activity, more hazardous materials, and more impact on neighbors, with fewer design standards. Many codes add campus-style districts, such as an industrial park or business park, alongside the ladder.
Three naming systems are common:
- M districts (M-1, M-2, M-3), where the number usually rises with intensity.
- I districts (I-1, I-2, sometimes I-3), which work the same way with a different letter.
- Two-letter districts (LI or IL, HI or IH, IG, IP, BP), where the name carries the tier.
The ladder is not standard. Detroit has five M districts, and its M3 (General Industrial) sits in the middle, below M4 (Intensive Industrial) and M5 (Special Industrial). Tampa has only two industrial districts, IG and IH.
The common labels at a glance
| Label | Usual tier | What it usually allows | Explainer |
|---|---|---|---|
| M-1 | Light | Warehousing, distribution, light manufacturing, flex; outdoor storage limited or conditional | M-1 |
| M-2 | General or heavy | Manufacturing, truck terminals, outdoor storage yards | M-2 |
| M-3 | Heaviest in most M codes | High-impact industry, waste and recycling, fuel storage, outdoor yards | M-3 |
| I-1 | Light | Warehousing, distribution, light manufacturing, flex, often self-storage | I-1 |
| I-2 | General or heavy | Manufacturing, truck terminals, outdoor storage yards | I-2 |
| LI, IL | Light | Warehousing, flex, light manufacturing; in some codes a different meaning (see below) | LI |
| HI, IH | Heavy | Intensive manufacturing, hazardous materials, bulk storage, outdoor yards | HI |
| IP | Industrial park | Light industry, research, flex, and offices under stricter design standards | IP |
| BP | Business park | Offices, research, light assembly, flex, often warehousing, mostly indoors | BP |
Each row is the usual pattern, not a rule. Every city writes its own use table.
What usually separates light from heavy
Outdoor storage. This is the line most industrial buyers care about. Light districts tend to allow it only as an accessory use, screened, or by conditional use. Heavy districts allow yards as a primary use. In Tampa, open storage is an accessory use, with conditions, in the CI commercial district and is permitted in both IG and IH. Dallas describes its heavy IM district as manufacturing "with accompanying open storage."
Enclosed operations and performance standards. Light districts usually require most work inside buildings and set tighter limits on noise, odor, vibration, and glare. Madison's IL district calls for landscaping and screening to keep light manufacturing compatible with neighbors, and Huntsville's Industrial Park requires most uses to be inside enclosed buildings.
Hazardous and objectionable uses. Heavy manufacturing, explosives, hazardous materials, and salvage are usually reserved for the top tier, often by special use. In Tampa's use table, heavy manufacturing is permitted only in IH, and explosive storage or manufacturing, hazardous materials, and junkyards are special uses only in IH. Portland's IH zone is where industries unwelcome elsewhere, because of objectionable impacts or appearance, may locate.
Truck terminals. Usually a heavy-tier use, but not always. Dallas lists freight terminals in its LI district, subject to the code's review flag, and Huntsville permits trucking terminals in its Industrial Park District.
Location and access. Codes often steer heavier districts away from homes and onto major roads. Orlando requires both its I-P and I-G districts to reach an arterial or four-lane collector without passing through a residential district, and applies I-G to areas distant from established or planned residential areas.
Do this in Plotzy
Ask the zoning code a question and get a cited answer
Zoning AI reads the ordinance for you. Ask about permitted uses, setbacks, FAR, height, or parking for a specific parcel and get the answer with the section it came from.
- Two-level zoning on every parcel, nationwide
- Plain-English answers with section-level citations
- Filter parcels by zoning before you spend a day on due diligence
Free trial
Where common industrial uses usually fit
- Industrial outdoor storage (truck, trailer, and container yards): usually the general or heavy tier, such as M-2, I-2, IG, or IH. See our industrial outdoor storage guide.
- Self-storage: often light industrial, and in some codes commercial. Tampa permits mini-warehouses in CI, IG, and IH, and Dallas permits them in LI. See our self-storage site selection guide.
- Warehouse and distribution: permitted in most industrial districts, including many business parks.
- Flex and small-bay: light industrial, industrial park, and business park districts.
- Data centers: many older use tables do not name them. Check whether the table lists the use, or how the city classifies it, before assuming any district allows it.
How to tell which ladder a city uses
- Count the industrial districts. Open the industrial article of the code and list every district. Tampa defines its industrial districts as IG and IH. Portland has three industrial zones (IG1, IG2, and IH), and San Diego has IP, IL, IH, IS, and IBT zones.
- Read the names, not just the numbers. Detroit's M3 is General Industrial, the middle of five. Austin's LI is Limited Industrial Service, not Light Industrial.
- Separate zoning from future land use. In Florida, LI and HI often appear on the comprehensive plan map. Hillsborough County's future land use map uses LI, LI-P, and HI, which are not zoning districts. See our guide to future land use vs. zoning.
- Look for planned districts. Pinellas County's IPD (Industrial Planned Development) is governed by an approved master plan, and planned development rules generally come from the approved plan. See our PUD explainer.
- Watch for lookalikes. In unincorporated Pinellas County, LI is Limited Institutional. In Minnesott Beach, North Carolina, IP is Institutional and Public. OS can mean open space or office service, as our OS explainer explains.
How to check a specific parcel
- Confirm the jurisdiction. A mailing address does not tell you whether a city or the county zones the parcel. Our guide on how to find out what a property is zoned for walks through the lookup.
- Read the district on the official zoning map and its full name in the legend.
- Find your exact use in the use table and note whether it is permitted, conditional, or not listed. See by right and conditional use permit.
- Read the standards that decide industrial deals: outdoor storage and screening, setbacks and buffers from residential districts, height, and truck access.
- Check whether an existing yard or use is legally nonconforming, and whether any overlay district applies.
- For certainty, get a zoning verification letter.
In Plotzy, filter an industrial corridor by zoning designation and lot size, and ask Zoning AI "Which industrial district here permits outdoor storage of trucks and trailers by right, and what screening applies?" for an answer with the section cited. For teams that want this screen run across a whole pipeline or county, with a person reviewing the short list, see AI site selection.
Frequently asked questions
What is the difference between M-1 and M-2?
Is I-1 the same as M-1 or LI?
In function, usually. I-1, M-1, LI, and IL are all common names for the light industrial tier. The use table, not the label, decides what a specific district allows.
Which industrial zoning allows outdoor storage?
Usually the general or heavy tier, such as M-2, I-2, IG, IH, or HI, where yards are a primary use with screening. Light districts often allow outdoor storage only as an accessory use or by conditional use.
Is a business park the same as industrial zoning?
Not quite. A business park district allows offices, research, light assembly, and often warehousing in a campus setting, but usually excludes yards and heavy industry. See our BP explainer.
Can the same label mean different things in different cities?
Yes. Detroit's M3 is a middle tier, Austin's LI is Limited Industrial Service, and Pinellas County's LI is institutional. Always read the district's full name and use table.
Sources
District names and standards on this page were checked against each jurisdiction's own code or planning documents in November 2026. Codes are amended often, so confirm the current text before relying on any detail.
- City of Tampa Code, Sec. 27-42, Definitions of groupings of various districts, accessed November 2026. Tampa's industrial districts.
- City of Tampa Code, Sec. 27-156, Official schedule of district regulations (Table 4-1), accessed November 2026. Open storage, heavy manufacturing, hazardous uses, and mini-warehouses by district.
- City of Detroit Zoning Ordinance, Chapter 50, Article X, Industrial Zoning Districts, accessed November 2026. Detroit's M1 to M5 district names.
- Portland Zoning Code, Chapter 33.140, Employment and Industrial Zones (March 1, 2025 edition), archived copy dated October 5, 2026, accessed November 2026. Portland's IG1, IG2, and IH zones. The city's site blocked automated access, so the archived copy was used.
- San Diego Municipal Code, Chapter 13, Article 1, Division 6, Industrial Base Zones (September 2026 edition), accessed November 2026. San Diego's industrial zones.
- Madison General Ordinances, Sec. 28.088, Industrial, Limited District, accessed November 2026. IL statement of purpose.
- Dallas Development Code, Sec. 51A-4.123, Commercial Service and Industrial Districts, accessed November 2026. LI uses and IM purpose.
- City of Huntsville Zoning Ordinance, Article 46, Industrial Park District Regulations, accessed November 2026. Permitted uses and enclosed-building rule.
- City of Orlando Code, Chapter 58, Part 2J, Secs. 58.291 to 58.293, I-P Industrial Park District, accessed November 2026. I-P access standards.
- City of Orlando Code, Chapter 58, Part 2K, Secs. 58.301 and 58.302, I-G General Industrial District, accessed November 2026. I-G purpose, location, and access standards.
- City of Austin Land Development Code, Chapter 25-2, Article 2, Division 4, Industrial Base Districts, accessed November 2026. Austin's LI designation.
- Plan Hillsborough: Hillsborough County Future Land Use map service, accessed November 2026. LI, LI-P, and HI land use categories.
- Pinellas County Code, Chapter 138, Article V, Sec. 138-760, Employment and industrial districts, accessed November 2026. IPD purpose.
- Pinellas County Code, Chapter 138, Article VI, Public/Semi-Public Districts, accessed November 2026. LI, Limited Institutional district.
- Town of Minnesott Beach Code, Sec. 151.167, IP Institutional and Public, accessed November 2026. IP as an institutional district.
Related reading
- What Is M-1 Zoning? Light Industrial and Manufacturing Districts Explained
What M-1 zoning usually allows, the performance standards and outdoor storage limits that come with it, how Los Angeles, New York, and Detroit define it, and what developers build on M-1 land.
- What Is I-1 Zoning? Light Industrial Districts (I-1, IL, LI) Explained
What I-1 zoning usually allows, how it relates to the M-1 designation other cities use, how Miami-Dade, Austin, and other jurisdictions label light industrial, and what developers build on I-1 land.
- What Is LI Zoning? Light Industrial Districts (LI and IL) Explained
What LI zoning usually allows, why IL is the same label reversed, how Austin, Dallas, San Diego, and Madison define it, and why LI means Limited Institutional in Pinellas County.
- What Is HI Zoning? Heavy Industrial Districts (HI and IH) Explained
What HI zoning usually allows, why IH is the same label reversed, how Tampa, San Diego, Portland, and Pinellas County define heavy industrial, and why HI is often a Florida land use category rather than a zoning district.
- Industrial Outdoor Storage (IOS) Site Selection: Zoning and How to Find Yards
Where truck, trailer, container, and equipment yards are permitted, the screening, paving, and stormwater rules that apply, and a parcel search recipe for IOS and small-bay industrial sites.
- Self-Storage Site Selection: Zoning Requirements and How to Find Qualifying Parcels
Which zoning districts allow self-storage by right, what the code usually requires, the site criteria that matter, and a step-by-step parcel search for storage sites.