Zoning guide

Types of Commercial Zoning: C-1 to C-5, CN, CG, CBD and Office Districts Explained

How commercial zoning tiers work, what C-1 to C-5, CN, CG, CBD, B-1 to B-3, O-1, and MU usually mean, why the same label means different things in different cities, how to tell which system a city uses, and how to check a parcel.

By Nathan Robinson, Founder, Plotzy Published 10 min read

Most zoning codes have several commercial districts, arranged from the least intensive, a neighborhood district for corner stores and small offices, to the most intensive, a highway, heavy commercial, or downtown district. The label on a parcel (C-2, CG, B-3, CBD) tells you which rung it is on in that city's code. It does not tell you what the rung allows anywhere else. This guide explains how the tiers usually work, what the common labels usually mean, and how to read a city's own system.

Every city writes its own code, so treat the meanings below as the common pattern and confirm the district on a specific parcel in the municipal code.

How commercial tiers work

Commercial districts usually step up in four ways at once:

  • Uses: each district up the ladder adds uses with more traffic, noise, hours, or outdoor activity, such as drive-throughs, fuel, vehicle sales and repair, and outdoor storage.
  • Scale: minimum lot sizes, heights, and floor area limits grow. Tampa's neighborhood district (CN) needs a 5,000 square foot lot and caps height at 35 feet; its general district (CG) needs 10,000 square feet and allows 45 feet.
  • Location: neighborhood districts are mapped next to homes, general districts along arterials and in shopping centers, and heavy or highway districts on major roads away from homes.
  • Buffers: rules for screening and setbacks from residential districts get stricter as the uses get heavier.

Codes name the rungs in one of four ways:

  • Numbers: C-1, C-2, C-3, and so on, where a higher number usually means more intensity.
  • Letters: CN (neighborhood), CG (general), and CI (intensive), as in Tampa and Hillsborough County.
  • B for business: B-1, B-2, B-3, as in Fort Lauderdale, or B1 to B6 in Detroit.
  • Descriptive names: Austin uses LR (Neighborhood Commercial), GR (Community Commercial), CS (General Commercial Services), and CH (Commercial Highway Services).

Downtowns often sit outside the ladder in a separate district, such as CBD (Central Business District). Office-only districts (O-1, OP, C-O) and mixed-use districts (MU) sit beside it.

Common commercial labels compared

One-line meanings are the most common pattern, not a rule. Each explainer shows how real cities define the label.

LabelWhat it usually meansWatch forExplainer
C-1Neighborhood commercial: small retail, services, and offices near homesIndianapolis uses C-1 for an Office-Buffer districtC-1
C-2General or community commercial: the common corridor districtOften the first district where drive-throughs and fuel are allowed, sometimes only conditionallyC-2
C-3Heavy, highway, or general commercial, often the top commercial rungIn New York City, C3 is a waterfront recreation districtC-3
C-4Regional shopping, general commercial, or heavy commercialBaltimore's C-4 is Heavy Commercial; New York's C4 is a general commercial district for shopping centersC-4
C-5No common meaning: downtown, central commercial, or a narrow auto-oriented districtDowntown in Baltimore, drive-ins and car washes in ColumbusC-5
CNCommercial Neighborhood: everyday retail and services near homesUsually excludes or conditions drive-throughs and fuelCN
CGCommercial General: broad retail, restaurants, services, and hotelsVehicle sales and storage often sit one district up (CI)CG
CBDCentral Business District: the downtown coreRules focus on height, floor area, and street frontage, not use listsCBD
B-1Neighborhood or local businessSame role as C-1 in a B codeB-1
B-2Community or general businessFort Lauderdale's B-2 is General BusinessB-2
B-3General business with auto-oriented usesFort Lauderdale's B-3 is Heavy Commercial/Light IndustrialB-3
O-1Low-intensity office, often a buffer next to homesMany cities use OP, OI, or C-O insteadO-1
MUMixed use: residential with commercial or officeCan be a base district or a suffix on another districtMU

Why the same label means different things

Labels are local. A few examples from official codes:

  • The top rung moves. Phoenix stops at C-3 (General Commercial). Baltimore runs from C-1 to C-5. Indianapolis skips C-2 and C-6 and goes up to C-7 (High-Intensity Commercial).
  • The same number, a different job. C-5 is the Downtown District in Baltimore. In Columbus, C-5 permits only fuel stations, carry-outs, car washes, drive-ins, and fast food. In Indianapolis, it is the General Commercial District for auto-oriented and outdoor uses.
  • The same letters, a different word. CI means Commercial Intensive in Tampa and Hillsborough County. In Durham, North Carolina, CI means Commercial Infill, a small pedestrian-oriented district.
  • A label outside the commercial family. New York City's C3 is a waterfront recreation district. Tampa's code does not count its CBD districts among its commercial districts at all.
  • County versus city. Unincorporated Hillsborough County and the City of Tampa both use CN, CG, and CI, but each under its own code with its own standards. See our Tampa and Hillsborough County guides.

Do this in Plotzy

Ask the zoning code a question and get a cited answer

Zoning AI reads the ordinance for you. Ask about permitted uses, setbacks, FAR, height, or parking for a specific parcel and get the answer with the section it came from.

  • Two-level zoning on every parcel, nationwide
  • Plain-English answers with section-level citations
  • Filter parcels by zoning before you spend a day on due diligence
See Zoning AI

Free trial

How to tell which tier system a city uses

  1. Find who zones the parcel. A city address can sit in unincorporated county land. Check the city limits on the official map first; our guide on how to find out what a property is zoned for covers this step.
  2. Find the district list. Most codes have a section that establishes the districts, or a grouping section. Tampa's Sec. 27-42, for example, lists its commercial districts as CN, CG, CI, several Ybor City and Seminole Heights districts, and commercial planned developments.
  3. Count the commercial rungs. Two or three rungs means the top one is probably the heavy or highway district. Five or more means the upper rungs are likely specialized, such as regional shopping, downtown, or auto-oriented districts.
  4. Read each purpose statement. One paragraph per district tells you its role. Tampa's CN, for example, is for daily needs and "shall not be used to promote strip commercial development."
  5. Compare the use table across districts. Find your use and see the lowest district where it is permitted and where it becomes conditional or special.
  6. Check suffixes, overlays, and planned developments. Sub-district numbers (CBD-1, CBD-2), overlay districts, and planned developments can change the base rules. See our overlay district and PUD explainers.
  7. Check the future land use map. In many Florida counties, density and floor area come from the parcel's future land use category, not the zoning district. See future land use vs. zoning.

Commercial ladders in real codes

JurisdictionCommercial districts, lowest to highest
Tampa, FLCN, CG, CI, with CBD-1 and CBD-2 downtown
Hillsborough County, FL (unincorporated)CN, CG, CI
Pinellas County, FL (unincorporated)C-1 (Neighborhood Commercial), C-2 (General Commercial and Services), plus CP (Commercial Parkway) and CR (Commercial Recreation)
Fort Lauderdale, FLCB (Community Business), B-1 (Boulevard Business), B-2 (General Business), B-3 (Heavy Commercial/Light Industrial), with RAC-CC and other Downtown RAC districts downtown
Austin, TXLR, GR, CS and CS-1, CH, with CBD and DMU downtown
Phoenix, AZC-O (Commercial Office), C-1, C-2, C-3
Baltimore, MDC-1, C-2, C-3, C-4, with C-5 downtown
Indianapolis, INC-1 (Office-Buffer), C-3, C-4, C-5, C-7, plus C-S (Special Commercial)

Read across the rows: CG in Tampa, C-2 in Pinellas County, B-2 in Fort Lauderdale, GR in Austin, and C-2 in Phoenix fill a similar general commercial role under four different naming systems. City guides: Tampa, Hillsborough County, Pinellas County, Fort Lauderdale, Austin, Phoenix, and Detroit, which uses B1 to B6.

Office and mixed-use districts

Office districts are usually separate from the retail ladder. They allow professional and medical offices and sometimes limited retail, and they are often mapped as a buffer between commercial corridors and homes. Tampa's office districts include RO, RO-1, OP, and OP-1, and Phoenix's C-O is Commercial Office. See our O-1 explainer.

Mixed-use districts allow residential together with commercial or office uses, often apartments over ground-floor retail. Some codes treat mixed use as its own base district, and others add it as a suffix or overlay on a commercial district. See our MU explainer. For the next family up, see our guide to industrial zoning types.

How to check a specific parcel

Confirm the district on the official zoning map, then read three things in the code: the district's purpose statement, the use table entry for your exact use, and the lot, height, and buffer standards. If the parcel's label is unfamiliar, find the code's list of districts and place the label on the city's own ladder before comparing it with anywhere else. For a formal answer, request a zoning verification letter. In Plotzy, filter parcels by zoning designation and lot size to compare commercial sites across a market, and ask Zoning AI "Which commercial district here is the lowest one that permits a drive-through restaurant?" for an answer with the code section cited. For teams that want this check run across a whole pipeline or county, with a person reviewing the short list, see AI zoning analysis.

Frequently asked questions

What are the types of commercial zoning?

Most codes have a neighborhood commercial district, a general or community commercial district, and a heavy or highway commercial district, often with a separate downtown district, office districts, and mixed-use districts beside them. The labels vary: C-1 to C-3, CN, CG, and CI, B-1 to B-3, or descriptive names.

Does a higher number always mean more intensive zoning?

Usually within one code, but not always. New York City's C3 is a waterfront recreation district, and in Columbus the C-5 district allows fewer uses than C-4. Across cities the numbers are not comparable at all.

What is the difference between C-2 and CG?

Often nothing but the naming system. Both are usually the general commercial district in their code. The use tables still differ by city, so compare the specific uses you need.

Is CBD zoning commercial zoning?

It allows commercial uses, but many codes treat it as its own downtown district. Tampa's code does not list its CBD districts in its commercial grouping, and Baltimore zones downtown as C-5 within its commercial title.

What is the most common commercial zoning?

There is no national count. The general commercial district (C-2, CG, B-2, or an equivalent) is the usual corridor district, but check the zoning map in your market.

Sources

District names and purpose statements on this page were checked against each jurisdiction's own code or official documents on November 19, 2026. Codes are amended often, so confirm the current text before relying on any detail.

Related reading