Zoning designation
What Is LI Zoning? Light Industrial Districts (LI and IL) Explained
What LI zoning usually allows, why IL is the same label reversed, how Austin, Dallas, San Diego, and Madison define it, and why LI means Limited Institutional in Pinellas County.
LI is usually the light industrial district in codes that use two-letter labels instead of numbered tiers. IL is the same idea with the letters reversed (Industrial, Light), and both play the role that I-1 and M-1 play elsewhere: warehousing, distribution, flex space, and light manufacturing, with limits on outdoor storage and off-site impacts. The letters are not universal. Austin's LI is Limited Industrial Service, and in unincorporated Pinellas County, Florida, LI is not industrial at all. Read the district's full name before relying on the abbreviation.
What LI usually allows
- Warehousing, distribution, and wholesale.
- Light manufacturing, assembly, and fabrication, mostly inside buildings.
- Flex and office-warehouse buildings, showrooms, and research and development.
- Contractor shops, equipment rental, and vehicle and machinery repair.
- Self-storage (mini-warehouses) in many codes.
- Limited retail and services that support the district.
Outdoor storage is usually limited to an accessory use, screened, or made conditional. Truck terminals, heavy manufacturing, and hazardous materials usually belong to the heavy tier. See our HI explainer.
What the code usually requires
- Performance standards for noise, odor, vibration, glare, and emissions, usually measured at the property line.
- Enclosed operations for most manufacturing and processing.
- Screening for loading docks and any permitted outdoor storage, especially facing streets and residential districts.
- Buffers and setbacks next to residential districts, often with height limits close to them.
- Truck access and loading standards, and in some codes a requirement to front an arterial road.
How real cities define LI
- Austin: LI is Limited Industrial Service, the designation for a commercial service use or limited manufacturing use generally located on a moderately sized site. MI (Major Industry) is the heavier district, and IP (Industrial Park) is the campus version. See our Austin zoning guide and IP explainer.
- Dallas: LI is the Light Industrial district, for light industrial, office, research and development, and commercial uses in an industrial park setting, in areas that may be next to residential communities. Mini-warehouses are a permitted main use. Warehouses, freight terminals, and outside storage are listed too, each carrying the code's [RAR] review flag. Buildings are capped at 70 feet and five stories, with 80 percent lot coverage and a floor area ratio of 1.0 for all uses combined.
- San Diego: the IL (Industrial, Light) zones provide for a wide range of manufacturing and distribution, in an environment free from the adverse impacts of some heavy industrial uses. IL-1-1 allows primarily light industrial uses, IL-2-1 adds office and limited commercial, and IL-3-1 adds commercial uses. Heavier industry belongs to the IH zones.
- Madison, Wisconsin: IL is the Industrial, Limited district, for light manufacturing, offices, warehousing, flex space, limited storage, and limited retail and services that primarily serve the industrial uses, with landscaping and screening. IG (Industrial, General) is the heavy district.
- Hillsborough County, Florida: LI (Light Industrial) and LI-P (Light Industrial Planned) are categories on the county's future land use map, not zoning districts. A parcel can carry an LI land use category and a different zoning code. See our Hillsborough County future land use guide.
- Pinellas County, Florida (unincorporated): LI is the Limited Institutional district, for day care facilities, nursing homes, libraries, museums, places of worship, government buildings, and similar uses. The county's industrial districts are E-1, E-2, I, and IPD. See our Pinellas County zoning guide.
- Tampa does not use LI. Its industrial districts are IG (Industrial General) and IH (Industrial Heavy). See our Tampa zoning guide.
In Dallas, San Diego, and Madison, LI or IL is the light tier below a heavier district. In Austin it is a service and limited manufacturing district, and in Pinellas County it is institutional.
Do this in Plotzy
Ask the zoning code a question and get a cited answer
Zoning AI reads the ordinance for you. Ask about permitted uses, setbacks, FAR, height, or parking for a specific parcel and get the answer with the section it came from.
- Two-level zoning on every parcel, nationwide
- Plain-English answers with section-level citations
- Filter parcels by zoning before you spend a day on due diligence
Free trial
What you can typically build
Bulk and last-mile warehouses, flex and small-bay industrial, light manufacturing and assembly, contractor and service shops, and self-storage where the use table allows it. Industrial outdoor storage is often the weak spot: many LI districts cap yards or make them conditional, so a truck or container yard usually needs the heavy tier. Our self-storage site selection guide and industrial outdoor storage guide cover how to find sites and confirm the entitlement.
How to check a specific parcel
Confirm the district on the official zoning map and read its full name in the legend, because LI and IL do not mean the same thing everywhere. Then read the use table for your exact use and the outdoor storage, screening, and setback standards. Check the future land use category too, since in Florida it can carry an LI label of its own. In Plotzy, filter an industrial corridor to LI, IL, and equivalent designations by lot size, and ask Zoning AI "Is self-storage permitted in LI here, and is outdoor storage allowed?" for an answer with the section cited.
Frequently asked questions
What does LI zoning mean?
LI usually means light industrial: warehousing, distribution, flex space, light manufacturing, and often self-storage, with performance standards and limits on outdoor storage. In Austin it stands for Limited Industrial Service, and in Pinellas County, Florida, for Limited Institutional.
Is LI the same as IL, I-1, or M-1?
Usually, yes, in function. IL reverses the letters, and I-1 and M-1 are the numbered versions of the same light tier. Each city sets its own use list, so compare the use tables rather than the labels. See our I-1 explainer.
Is outdoor storage allowed in LI?
Often only as an accessory use with screening, or as a conditional use. A yard as the primary use usually needs the heavy district. Dallas is one exception that lists outside storage in LI, subject to its review flag.
Is self-storage allowed in LI?
In many codes, yes. Dallas lists mini-warehouses as a permitted use in LI. Some cities put self-storage in commercial districts or require a conditional use, so confirm it in the local table.
Sources
District names and standards on this page were checked against each jurisdiction's own code or planning documents in November 2026. Codes are amended often, so confirm the current text before relying on any detail.
- City of Austin Land Development Code, Chapter 25-2, Article 2, Division 4, Industrial Base Districts (Secs. 25-2-123 to 25-2-126), accessed November 2026. Austin's LI, MI, IP, and R&D designations.
- Dallas Development Code, Sec. 51A-4.123, Commercial Service and Industrial Districts, accessed November 2026. LI purpose, main uses, height, stories, lot coverage, and floor area ratio.
- San Diego Municipal Code, Chapter 13, Article 1, Division 6, Industrial Base Zones (September 2026 edition), accessed November 2026. Purposes of the IL and IH zones.
- Madison General Ordinances, Sec. 28.088, Industrial, Limited District, accessed November 2026. IL statement of purpose, and Sec. 28.089 for the IG district.
- Plan Hillsborough: Hillsborough County Future Land Use map service, accessed November 2026. LI, LI-P, and HI category codes and names.
- Pinellas County Code, Chapter 138, Article VI, Public/Semi-Public Districts (Sec. 138-1051), accessed November 2026. Purpose of the LI, Limited Institutional district.
- Pinellas County Code, Chapter 138, Article V, Sec. 138-760, Employment and industrial districts, accessed November 2026. The county's E-1, E-2, I, and IPD industrial districts.
- City of Tampa Code, Sec. 27-42, Definitions of groupings of various districts, accessed November 2026. Tampa's industrial districts are IG and IH.
Related reading
- Types of Industrial Zoning: M-1, M-2, M-3, I-1, I-2, LI, HI and Business Parks Explained
How industrial zoning tiers work, what M-1, M-2, M-3, I-1, I-2, LI, HI, IP, and BP usually mean, what separates light from heavy industrial, how to tell which ladder a city uses, and how to check a parcel for warehouse, outdoor storage, flex, or self-storage.
- What Is I-1 Zoning? Light Industrial Districts (I-1, IL, LI) Explained
What I-1 zoning usually allows, how it relates to the M-1 designation other cities use, how Miami-Dade, Austin, and other jurisdictions label light industrial, and what developers build on I-1 land.
- What Is M-1 Zoning? Light Industrial and Manufacturing Districts Explained
What M-1 zoning usually allows, the performance standards and outdoor storage limits that come with it, how Los Angeles, New York, and Detroit define it, and what developers build on M-1 land.
- What Is HI Zoning? Heavy Industrial Districts (HI and IH) Explained
What HI zoning usually allows, why IH is the same label reversed, how Tampa, San Diego, Portland, and Pinellas County define heavy industrial, and why HI is often a Florida land use category rather than a zoning district.
- What Is IP Zoning? Industrial Park Districts Explained
What IP zoning usually allows, the design standards that set an industrial park apart from light industrial, how Orlando, Austin, San Diego, and Huntsville define it, and the codes where IP means Institutional and Public.
- Self-Storage Site Selection: Zoning Requirements and How to Find Qualifying Parcels
Which zoning districts allow self-storage by right, what the code usually requires, the site criteria that matter, and a step-by-step parcel search for storage sites.