Zoning designation
What Is HI Zoning? Heavy Industrial Districts (HI and IH) Explained
What HI zoning usually allows, why IH is the same label reversed, how Tampa, San Diego, Portland, and Pinellas County define heavy industrial, and why HI is often a Florida land use category rather than a zoning district.
HI is the heavy industrial district in codes that use two-letter labels, and IH (Industrial, Heavy) is the same label with the letters reversed. It plays the role that I-2 and M-3 play in numbered codes: intensive manufacturing and processing, hazardous materials, bulk storage, and the uses a city will not allow anywhere else. For industrial outdoor storage and heavy users, it is the district where the use is most likely permitted by right. In Florida, HI often appears on the future land use map rather than the zoning map, so check which one you are reading.
What HI usually allows
- Everything permitted in the light industrial district, in most codes.
- Heavy manufacturing, processing, and refining.
- Hazardous materials, explosives, and bulk fuel storage, often by special or conditional use.
- Junkyards, salvage, and recycling, often conditional.
- Truck terminals, freight and container yards, and outdoor storage as a primary use.
- Port-related and rail-served industry.
Residential is usually prohibited, and retail and offices are limited to uses that support the district. Some codes also limit nonindustrial uses in HI to protect scarce heavy land for heavy users.
What the code usually requires
- Performance standards for emissions, noise, and vibration. They are the loosest in the code but still apply.
- Separation from residential districts, often larger for the most hazardous uses.
- Special or conditional use review for explosives, hazardous materials, and salvage, even in the heavy district.
- Screening for outdoor storage and salvage along streets and district boundaries.
- State and federal permits for air, water, and waste, which apply on top of zoning.
How real cities define HI
- Tampa: IH is the Industrial Heavy district, for intensive manufacturing and industrial uses near the Port of Tampa or in other areas able to support them. It is meant for uses that generate emissions and are not compatible with commercial, institutional, and residential uses. In Table 4-1, heavy manufacturing is permitted only in IH, and explosive storage or manufacturing, hazardous materials, and junkyards are special uses only there. Open storage is permitted in both IG and IH. Tampa's code also refers to a separate Heavy Industrial (HI) future land use designation. See our Tampa zoning guide.
- Hillsborough County, Florida: HI (Heavy Industrial) is a category on the county's future land use map, alongside LI and LI-P. It is not a zoning district. See our Hillsborough County future land use guide.
- Pinellas County, Florida (unincorporated): the heavy district is labeled I, Heavy Industry. It is intended for intensive industrial and manufacturing activities, with a wider variety of uses, higher intensities, and limited site design standards. See our Pinellas County zoning guide.
- San Diego: the IH (Industrial, Heavy) zones provide space for land-intensive industrial activities emphasizing base-sector manufacturing, with minimal development standards. They limit nonindustrial uses to preserve land for large-scale industrial users. IH-1-1 allows primarily manufacturing, and IH-2-1 allows manufacturing with some office.
- Portland, Oregon: IH is the Heavy Industrial zone, where all kinds of industries may locate, including those not wanted in other zones because of objectionable impacts or appearance. Its development standards are the minimum needed for safe, functional, and environmentally sound development. IG1, IG2, and IH together implement the city's Industrial Sanctuary designation.
- Dallas uses IM (Industrial Manufacturing) for the same role: heavy industrial manufacturing with accompanying open storage, not intended for areas in or near residential development. Its LI district is the lighter tier. See our LI explainer.
The label varies more than the role: IH, HI, I, and IM all name the top industrial tier in these codes, and in Hillsborough County HI is a land use category instead.
Do this in Plotzy
Ask the zoning code a question and get a cited answer
Zoning AI reads the ordinance for you. Ask about permitted uses, setbacks, FAR, height, or parking for a specific parcel and get the answer with the section it came from.
- Two-level zoning on every parcel, nationwide
- Plain-English answers with section-level citations
- Filter parcels by zoning before you spend a day on due diligence
Free trial
What you can typically build
Heavy manufacturing and processing plants, bulk terminals and fuel storage, recycling and salvage operations where approved, truck terminals, and large industrial outdoor storage yards. Warehouses and distribution are usually permitted too, though a few codes limit nonindustrial uses to keep heavy land available. Cities rarely map new heavy industrial land, and existing HI parcels near ports, rail, and highways are scarce. Our industrial outdoor storage guide covers how to find yards and confirm the entitlement.
How to check a specific parcel
Confirm the district on the official zoning map, not only the future land use map, and read its full name. Then read the use table for your exact use, because hazardous and salvage uses are often special or conditional even in HI. Measure the separation to the nearest residential district, and check for pending rezonings nearby. Our guide on checking conditional use describes what a hearing looks for. In Plotzy, filter an industrial area to HI, IH, and equivalent designations by lot size, and ask Zoning AI "Is outdoor storage of trucks and containers a permitted use in IH here, and what screening applies?" for an answer with the section cited.
Frequently asked questions
What does HI zoning mean?
HI usually means heavy industrial: intensive manufacturing, hazardous materials, bulk storage, salvage, truck terminals, and outdoor yards, subject to performance standards and separation from residential areas. In Florida it is also a common future land use category.
Is HI the same as IH, I-2, or M-3?
In function, usually. IH reverses the letters, and I-2 and M-3 are the numbered versions of the heavy tier. In codes with three or more tiers, the middle district can also be called general industrial, so compare the use tables.
What is the difference between LI and HI?
LI is light industrial, with most work inside buildings and outdoor storage limited. HI allows heavier manufacturing, hazardous uses, and outdoor yards. In Tampa, heavy manufacturing is permitted only in IH. See our LI explainer.
Can I build a warehouse in HI?
Usually yes. Tampa permits warehouses in IG and IH. San Diego limits nonindustrial uses in its IH zones to protect land for large industrial users, so confirm the use table.
Sources
District names and standards on this page were checked against each jurisdiction's own code or planning documents in November 2026. Codes are amended often, so confirm the current text before relying on any detail.
- City of Tampa Code, Chapter 27, Sec. 27-156, Official schedule of district regulations (Tables 4-1 and 4-2), accessed November 2026. IG and IH purposes, the uses permitted or special in each, and the Heavy Industrial (HI) future land use reference.
- City of Tampa Code, Sec. 27-42, Definitions of groupings of various districts, accessed November 2026. Tampa's industrial districts are IG and IH.
- Plan Hillsborough: Hillsborough County Future Land Use map service, accessed November 2026. HI, LI, and LI-P category codes and names.
- Pinellas County Code, Chapter 138, Article V, Sec. 138-760, Employment and industrial districts, accessed November 2026. Purpose of the I, Heavy Industry district.
- San Diego Municipal Code, Chapter 13, Article 1, Division 6, Industrial Base Zones (September 2026 edition), accessed November 2026. Purpose of the IH zones.
- Portland Zoning Code, Chapter 33.140, Employment and Industrial Zones (March 1, 2025 edition), archived copy dated October 5, 2026, accessed November 2026. IH name and characteristics. The city's site blocked automated access, so the archived copy was used.
- Dallas Development Code, Sec. 51A-4.123, Commercial Service and Industrial Districts, accessed November 2026. Purpose of the IM district.
Related reading
- Types of Industrial Zoning: M-1, M-2, M-3, I-1, I-2, LI, HI and Business Parks Explained
How industrial zoning tiers work, what M-1, M-2, M-3, I-1, I-2, LI, HI, IP, and BP usually mean, what separates light from heavy industrial, how to tell which ladder a city uses, and how to check a parcel for warehouse, outdoor storage, flex, or self-storage.
- What Is LI Zoning? Light Industrial Districts (LI and IL) Explained
What LI zoning usually allows, why IL is the same label reversed, how Austin, Dallas, San Diego, and Madison define it, and why LI means Limited Institutional in Pinellas County.
- What Is I-2 Zoning? Heavy and General Industrial Districts Explained
What I-2 zoning usually allows, why it is the district where outdoor storage and truck terminals are typically permitted by right, how Atlanta, San Antonio, Anchorage, and Saint Paul define it, and why Lincoln's I-2 is an industrial park.
- What Is M-3 Zoning? Heavy Industrial and Manufacturing Districts Explained
What M-3 zoning usually allows, the high-impact uses that only the heaviest district permits, how Los Angeles, New York, Chicago, and Detroit define it, and what to check before buying M-3 land.
- Industrial Outdoor Storage (IOS) Site Selection: Zoning and How to Find Yards
Where truck, trailer, container, and equipment yards are permitted, the screening, paving, and stormwater rules that apply, and a parcel search recipe for IOS and small-bay industrial sites.