City zoning maps
Orlando Zoning Map: How to Look Up Zoning in Orlando, Florida
Where the City of Orlando's official zoning map and Land Development Code live, what the R-1, R-3, O, MU, AC, I-G, PD, and overlay labels like /T and /SP mean, how city zoning differs from unincorporated Orange County, and how the city applies the Live Local Act.
The City of Orlando zones land under its Land Development Code, Chapters 58 through 68 of the City Code. Chapter 58 sets out the districts. Most labels on the map combine a base district with one or more overlays, written with slashes, such as AC-2/T/SP. Here is where to look and how to read what you find.
Where the official map and code live
- Orlando Information Locator: the city's property map. Enter an address and choose "Planning and Development."
- Zoning GIS layer: open data with each parcel's base district, overlays, and planned development name. The city says it is not legally binding.
- Land Development Code on Municode (version of October 7, 2026). Chapter 58, Part 1B holds Figure 1 (lot, setback, density, and height standards) and Figure 2 (allowed uses).
- Growth Management Plan: the comprehensive plan. Rezonings are reviewed for consistency with it and its Future Land Use Map.
- Zoning questions: the City Planning Division's Planner on Call, 407.246.2269, option 1, or cityplanning@orlando.gov.
- Plotzy: Orlando's zoning map and code, loaded parcel by parcel. Search an address to see the parcel's zone next to its owner, lot size, and last sale, or filter a search by zoning. Zoning AI (Production plan and up) answers what the code allows on that parcel, with the section cited. Plotzy is not an official source, so confirm anything a deal depends on with the city. Start a free trial.
The city notes that overlays, parking, and other code sections may add to the base standards.
First check: city, county, or another city?
The city warns that some addresses marked "Orlando" fall under Orange County. The county has 13 municipalities, including Orlando, Winter Park, Maitland, Apopka, Ocoee, and Winter Garden, and each zones its own land. Check the Orlando Information Locator first. For parcels outside the city, the Orange County Property Appraiser map shows the jurisdiction and zoning. Land in no city is zoned by the county; see the unincorporated Orange County guide.
How Orlando's districts are organized
The part before the first slash is the base district, which sets uses and base standards. Everything after a slash is an overlay. Figure 1 of Chapter 58 sets the lot size, height, density, and floor area for each district, and Figure 2 lists the uses each district allows. Use counts below come from Figure 2, which treats R-1AA, R-1A, R-1, and R-1N as one column.
Districts are grouped by the category Plotzy gives them, and a Plotzy parcel search can be filtered by any of these categories.
Residential
| Code | District | Limits | Allowed by right | Conditional |
|---|---|---|---|---|
| R-1AA | One Family Residential. The largest-lot single-family district. | Up to 4.7 units per acre, 10,000 sq ft minimum lot, 30-foot height in the Traditional City and 35 feet outside. | Single-family home, accessory dwelling unit, +5 more | 4 conditional uses |
| R-1A | One Family Residential. Single-family neighborhoods on large lots. | Up to 5.7 units per acre, 7,700 sq ft minimum lot, 30-foot height in the Traditional City and 35 feet outside. | Single-family home, accessory dwelling unit, +5 more | 4 conditional uses |
| R-1 | One Family Residential. Single-family neighborhoods on mid-size lots. | Up to 7.0 units per acre, 6,000 sq ft minimum lot, 30-foot height in the Traditional City and 35 feet outside. | Single-family home, accessory dwelling unit, +5 more | 4 conditional uses |
| R-1N | One Family Residential. Single-family neighborhoods on the smallest R-1 lots. | Up to 8.0 units per acre, 5,500 sq ft minimum lot, 30-foot height in the Traditional City and 35 feet outside. | Single-family home, accessory dwelling unit, +5 more | 4 conditional uses |
| R-2A | Residential. Single-family homes and duplexes at low density. | Up to 12 units per acre, 4,400 sq ft lot for a single-family home and 5,500 for a duplex, 30-foot height in the Traditional City and 35 feet outside. | Duplex or tandem, accessory dwelling unit, +8 more | 6 conditional uses |
| R-2B | Residential. Homes, duplexes, townhomes, and small apartment buildings. | Up to 16 units per acre, 4,000 sq ft lot for a single-family home and 5,000 for a duplex, 30-foot height in the Traditional City and 35 feet outside. | Townhomes, multifamily up to 5 units per building site, +10 more | 9 conditional uses |
| R-3A | Development District. Townhomes and low-density apartments. | Up to 12 units per acre, 4,400 sq ft single-family lot, 35-foot height. | Multifamily, townhomes, +14 more | 9 conditional uses |
| R-3B | Development District. Apartments and townhomes at medium density. | 12 to 21 units per acre, 4,000 sq ft single-family lot, 40-foot height (55 feet as a conditional use). | Multifamily, townhomes, +16 more | 9 conditional uses |
| R-3C | Development District. Apartments and townhomes at higher density. | 12 to 30 units per acre, 3,500 sq ft single-family lot, 45-foot height (55 feet as a conditional use). | Multifamily, townhomes, +15 more | 9 conditional uses |
| R-3D | Development District. The most intense apartment district. | 30 to 75 units per acre, 7,500 sq ft nonresidential lot, 55-foot height (100 feet as a conditional use). | Multifamily, child or adult day care for 6 to 30 people, +9 more | 9 conditional uses |
Ask Plotzy about setbacks, lot width, impervious surface limits, and accessory dwelling unit rules on any residential parcel.
Commercial and office
| Code | District | Limits | Allowed by right | Conditional |
|---|---|---|---|---|
| O-1 | Office and Residential, low intensity. Small offices mixed with homes. | Up to 21 units per acre, nonresidential FAR up to 0.40, 4,500 sq ft single-family lot (4,950 outside the Traditional City), 30-foot height in the Traditional City and 35 feet outside. | Office and medical office, multifamily, +18 more | 10 conditional uses |
| O-2 | Office and Residential, medium intensity. Offices and apartments. | 12 to 40 units per acre, nonresidential FAR 0.30 to 0.70, 7,500 sq ft nonresidential lot, 75-foot height. | Office and medical office, multifamily, +18 more | 17 conditional uses |
| O-3 | Office and Residential, high intensity. Larger office and apartment buildings. | 30 to 75 units per acre, nonresidential FAR 0.40 to 1.00, 7,500 sq ft nonresidential lot, 75-foot height (200 feet as a conditional use). | Office and medical office, multifamily, +13 more | 13 conditional uses |
Ask Plotzy about setbacks, minimum FAR, impervious surface limits, and appearance review on any office parcel.
Mixed use
| Code | District | Limits | Allowed by right | Conditional |
|---|---|---|---|---|
| AC-3A | Downtown Metropolitan Activity Center. Downtown, the city's most intense district. | 75 to 200 units per acre and FAR 0.75 to 4.0, the highest in the code. Height set by airport zoning and FAA limits. | Multifamily, hotel or motel, +19 more | 14 conditional uses |
| AC-N | Neighborhood Activity Center. Small mixed-use centers serving nearby neighborhoods. | 15 to 30 units per acre, nonresidential FAR up to 0.30, 45-foot minimum frontage, 35-foot height (75 feet as a conditional use). | Multifamily, light retail, +25 more | 10 conditional uses |
| AC-1 | Community Activity Center. Community-scale shopping and mixed use. | 20 to 40 units per acre, nonresidential FAR 0.35 to 0.70, 50-foot minimum frontage, 75-foot height. | Multifamily, light retail, +30 more | 11 conditional uses |
| AC-2 | Urban Activity Center. Urban-scale mixed-use centers. | 30 to 100 units per acre, nonresidential FAR 0.5 to 1.00, 50-foot minimum frontage, 100-foot height. | Multifamily, hotel or motel, +30 more | 14 conditional uses |
| AC-3 | Metropolitan Activity Center. Regional centers outside downtown. | 30 to 200 units per acre, nonresidential FAR 0.75 to 1.50, 50-foot minimum frontage, 200-foot height. | Multifamily, hotel or motel, +27 more | 13 conditional uses |
| MU-1 | Medium Intensity Mixed Use Corridor. Mixed use along arterial roads. | 15 to 30 units per acre, nonresidential FAR up to 0.50, 50-foot minimum frontage, 35-foot height (75 feet as a conditional use). | Multifamily, light retail, +32 more | 4 conditional uses |
| MU-2 | High Intensity Mixed Use Corridor. Taller mixed use along arterial roads. | 30 to 75 units per acre, nonresidential FAR 0.40 to 1.00, 50-foot minimum frontage, 100-foot height. | Multifamily, hotel or motel, +28 more | 5 conditional uses |
| MXD-1 | Mixed Residential-Office, lower intensity. Homes and apartments with limited office. | 12 to 21 units per acre, nonresidential FAR up to 0.30, 4,000 sq ft single-family lot (4,400 outside the Traditional City), 35-foot height. | Multifamily, office within a size cap, +16 more | 9 conditional uses |
| MXD-2 | Mixed Residential-Office, higher intensity. Apartments mixed with office and some ground-floor commercial. | 30 to 75 units per acre, nonresidential FAR up to 0.35, 7,500 sq ft nonresidential lot, 40-foot height for all-office buildings and 55 feet for others, up to 200 feet as a conditional use for residential. | Multifamily, office within a size cap, +20 more | 9 conditional uses |
Ask Plotzy about build-to lines and maximum setbacks, minimum FAR, intensity bonuses, and the MXD office and retail caps on any mixed-use parcel.
Industrial
Do this in Plotzy
Ask the zoning code a question and get a cited answer
Zoning AI reads the ordinance for you. Ask about permitted uses, setbacks, FAR, height, or parking for a specific parcel and get the answer with the section it came from.
- Two-level zoning on every parcel, nationwide
- Plain-English answers with section-level citations
- Filter parcels by zoning before you spend a day on due diligence
Free trial
| Code | District | Limits | Allowed by right | Conditional |
|---|---|---|---|---|
| I-C | Industrial-Commercial. Light industry mixed with commercial uses. | Nonresidential FAR up to 0.70, 50-foot minimum frontage, 75-foot height. | Light manufacturing, wholesale and warehouse, +18 more | 12 conditional uses |
| I-P | Industrial Park. Business parks, offices, and light industry. | FAR up to 0.70, 25,000 sq ft minimum lot, 75-foot height. | Light manufacturing, wholesale and warehouse, +11 more | 13 conditional uses |
| I-G | General Industrial. The broadest industrial district; heavy manufacturing needs approval. | FAR up to 0.70, 10,000 sq ft minimum lot, 75-foot height. | Light manufacturing, wholesale and warehouse, +14 more | 17 conditional uses |
Ask Plotzy about setbacks from residential districts, impervious surface limits, lot width, and distance rules for temporary labor services on any industrial parcel.
Agricultural
| Code | District | Limits | Allowed by right | Conditional |
|---|---|---|---|---|
| UR | Urban Reserve. Rural land held for future urban growth. Leaving UR requires a Growth Management Plan amendment. | One unit per 10 acres, 10-acre minimum lot, 35-foot height. | Agriculture, conservation uses, +1 more | 1 conditional use |
Ask Plotzy about setbacks, lot width, street frontage, and the plan amendment needed to leave UR on any agricultural parcel.
Other districts
| Code | District | Limits | Allowed by right | Conditional |
|---|---|---|---|---|
| P | Public Use. Land owned by a public body. Rezoning to P is limited to publicly owned property. | Set through conditional use permit review (Sec. 58.323). | Light public benefit uses on publicly owned land (Sec. 58.323) | Other public benefit uses, by conditional use permit (Sec. 58.323) |
| C | Conservation. Land kept mostly natural. Rezoning to C starts only with the Municipal Planning Board or City Council. | One unit per 5 acres, 5-acre minimum lot, FAR 0.05, 35-foot height. | Single-family home, conservation uses, +1 more | 2 conditional uses |
| H | Holding. Land held mostly undeveloped until it is rezoned. | One unit per 5 acres, 5-acre minimum lot, FAR 0.05, 35-foot height. | Single-family home, agriculture, +3 more | None |
| ASD-2 | Airport Support District, High Intensity. Employment land near Orlando International Airport in the Southeast Orlando Sector Plan (Chapter 68). No residential. | FAR up to 1.5. Other standards follow I-G, I-P, or AC-2, depending on the use. | Office, hotel or motel, +11 more | None listed |
| PD | Planned Development. Rules set by the plan City Council approves. See our PUD explainer. | Set by the approved plan. | Set by the approved plan. | Set by the approved plan. |
Ask Plotzy about setbacks, impervious surface limits, public use permit terms, and Southeast Sector Plan design standards on any of these parcels.
Density and FAR maximums in Figure 1 are base standards, and intensity bonuses can raise them. Where a row gives a second, taller height as a conditional use, that height needs a conditional use permit. ASD-2 uses come from the allowable use list in Figure 68-D, Chapter 68, which does not separate permitted from conditional uses. A PD needs a site of at least 10,000 sq ft and must be consistent with the Growth Management Plan. City Council approves it and can attach conditions; for PD standards, call the Planner on Call.
Overlays and special districts
- T, Traditional City: areas platted before World War II, with urban design standards and lower heights for several residential districts.
- SP, Specially Planned Area: each area has a special plan adopted by City Council, such as SODO, Orange Blossom Trail, Semoran Boulevard, Mills Avenue, and Edgewater Drive.
- HP, Historic Preservation: Downtown, Lake Eola Heights, Lake Lawsona, Lake Copeland, Lake Cherokee, and Colonialtown South. Work may need a certificate of appropriateness.
- AR, Appearance Review, AN, Aircraft Noise, RP, Resource Protection, and W, Wekiva: design, noise, and environmental overlays.
- MA, Major Attraction: flexibility for major tourist entertainment facilities.
- PH, Parramore Heritage: limits new social service uses.
Zoning verification letters
The City Planning Division's letter states the zoning district, the Future Land Use designation and any subarea policies, and, on request, the permitted uses. It does not say whether existing development meets code. The fee is $50 per parcel ID and processing takes up to 10 business days. Apply online and pay through Permit Lookup, or mail the PDF application with a check. See the guide to getting a zoning verification letter.
How rezoning works in Orlando
Chapter 65, Part 2I sets the process:
- Pre-application conference with planning staff, required unless waived. Request it online.
- Application by owners of at least 51 percent of the area, with a survey, the proposed zoning, its consistency with the Growth Management Plan, and the reasons.
- Technical Review Committee review and recommendations.
- Municipal Planning Board public hearing. The nine-member advisory board recommends; it has met in person only since December 16, 2025.
- City Council public hearing and final decision.
Activity Center rezonings need a master plan, and no new AC-3A district may be created. A property generally cannot reapply for one year after Council acts. Variances go to the Board of Zoning Adjustment. See how to rezone a property and how long rezoning takes.
What the Live Local Act changes here
Florida's Live Local Act requires cities to allow multifamily and mixed-use residential on land zoned commercial, industrial, or mixed use when at least 40 percent of units are affordable rentals for 30 years. Orlando's Policy 1236.1 (June 24, 2024) applies it this way:
- Eligible districts: MU-1, MU-2, AC-N, AC-1, AC-2, AC-3, AC-3A, I-C, I-G, and I-P, plus some Southeast Sector Plan and Baldwin Park categories, including ASD-1 and ASD-2. Parts of a PD can qualify by underlying zoning.
- Not eligible: the aircraft noise zone and areas near airport runways.
- Density up to 200 units per acre, the city's highest. FAR up to 150 percent of the city's highest, which the policy gives as 4.0.
- Height up to the tallest allowed within one mile or three stories, whichever is higher. Airport height rules still apply.
- Mixed use: at least 65 percent of square footage must be residential.
- Process: a Live Local pre-application meeting, then an administrative master plan reviewed by the Technical Review Committee, at the administrative master plan fee. The Planning Official replies by letter with conditions. An affordability covenant must be recorded before a building permit.
Compare the 2024 policy with the current statute before relying on it.
Future land use and the comprehensive plan
Orlando's comprehensive plan is the Growth Management Plan, which the city also calls Orlando's 2050 Growth Management Plan. Its Future Land Use Map gives each parcel a category that caps density and intensity, from 12 units per acre in Residential Low Intensity to 200 units per acre and 4.0 FAR in the Downtown Activity Center. The plan's Land Use Category Matrix (Figure LU-7) shows which zoning districts fit each category. Florida law requires zoning to be consistent with the plan, so a rezoning that does not fit the category also needs a Growth Management Plan amendment. The latest rewrite, the GMP Refresh, took effect October 9, 2025, and the plan was last amended effective February 12, 2026. See the Orlando future land use map and comprehensive plan guide.
How to check a specific parcel
The quickest check is to search the address in Plotzy, which shows the parcel's zone on a map; Zoning AI answers what the code allows there. To confirm it with the city:
- Confirm the parcel is inside the city limits in the Orlando Information Locator.
- Note the full code, base district and every overlay.
- Read Figures 1 and 2 in Chapter 58, then the Part 2 section for each overlay and any special plan. For a PD, get the approved plan.
- Check the Future Land Use designation, and ask for a zoning verification letter for anything a deal depends on.
Frequently asked questions
Where is the official Orlando zoning map?
The Orlando Information Locator shows zoning under Planning and Development. The Official Zoning Map on file with the city is the official record.
What does /T mean on an Orlando zoning code?
It is the Traditional City overlay, which adds design standards in pre-World War II neighborhoods.
What is AC-2 zoning in Orlando?
AC-2 is the Urban Activity Center District, a mixed-use district for urban-scale centers. Its height and floor area limits are in Figure 1 of Chapter 58.
Is my Orlando address in the City of Orlando?
Not always. Some are in unincorporated Orange County, so check the Orlando Information Locator first.
Sources
The codes, maps, and agency documents cited on this page were checked on November 15, 2026. Codes and city policies change often, so confirm the current version before relying on any detail. This page is general information, not legal advice.
- City of Orlando: Find Your Property's Zoning Category. Lookup steps, how to read labels, and contacts.
- City of Orlando: Zoning GIS layer. District codes, overlay names, and the disclaimer.
- City of Orlando Code, Chapter 58, Part 1B zoning tables. Figure 1 standards, Figure 2 uses, and the code version.
- City of Orlando Code, Chapter 58, Part 2. District names, the Official Zoning Map, and district and overlay purposes.
- City of Orlando Code, Chapter 68, Sec. 68.207. Figure 68-D, ASD-2 allowable uses and FAR, checked November 15, 2026.
- City of Orlando Code, Chapter 65, Part 2I. Rezoning steps, submittals, and limits.
- City of Orlando: Request a Zoning Verification Letter. Contents, fee, and timing.
- City of Orlando: Request a Pre-Application Meeting with a Planner. The city limits warning.
- City of Orlando: Municipal Planning Board. The board's role and meetings.
- City of Orlando: Live Local Act pre-application and Policy 1236.1, Special Permitting Rules and Procedures for Live Local Act Affordable Housing Projects (June 2024). Eligibility and process.
- Orange County: Annexation and Orange County Supervisor of Elections: Municipal Elections. The county's 13 municipalities.
- Florida Statutes 166.04151. Live Local Act rules for cities.
Related reading
- Orlando Future Land Use Map and Comprehensive Plan (Growth Management Plan)
Where the City of Orlando's future land use map and Growth Management Plan live, what the activity center, mixed use corridor, residential, office, and industrial categories allow, how they limit rezoning, and which plan amendments are moving in 2026.
- Orange County Zoning Map: How to Look Up Zoning in Unincorporated Orange County, Florida
Where unincorporated Orange County's zoning map and Chapter 38 zoning code live, what the A-1, R-1, R-CE, P-O, C-1 to C-3, I-1A to I-4, NC, NAC, and P-D districts mean, how to tell county zoning from Orlando and the other 12 cities, and how the county applies the Live Local Act.
- How to Find Out What a Property Is Zoned For (Any US Address)
A step-by-step method for looking up a parcel's zoning, reading the designation, telling permitted from conditional uses, catching overlays and planned developments, and confirming it with the planning department.
- How to Get a Zoning Verification Letter (Cost, Timing, and What It Covers)
What a zoning verification letter confirms and what it does not, how to request one, what ten US cities and counties charge and how long they take, and when a lender or survey needs a fuller zoning report instead.
- How to Rezone a Property: Step by Step, With Real City Fees
The steps of a rezoning from pre-application meeting to effective ordinance, what goes in the application, how neighbor protests and conditions work, and what Austin, Phoenix, Detroit, Miami, and Denver charge.
- What Is PUD Zoning? Planned Unit Developments (PUD and PD) Explained
What a planned unit development is, how PUD and PD zoning replace standard district rules with an approved plan, how Austin, Phoenix, and Detroit use them, and what to read before you buy PUD-zoned land.
- Florida Live Local Act Explained: What It Lets You Build on Commercial and Industrial Land
How Florida's Live Local Act lets qualifying affordable multifamily and mixed-use projects go on commercial, industrial, and mixed-use land without a rezoning, with the density, height, and approval rules as amended through July 2026.
- What Is an Overlay District? How Zoning Overlays Change What You Can Build
What an overlay district is, how it adds limits or permissions on top of base zoning, how Austin and New York City use overlays, and how to find out whether one applies to a parcel.