City zoning maps

Orange County Zoning Map: How to Look Up Zoning in Unincorporated Orange County, Florida

Where unincorporated Orange County's zoning map and Chapter 38 zoning code live, what the A-1, R-1, R-CE, P-O, C-1 to C-3, I-1A to I-4, NC, NAC, and P-D districts mean, how to tell county zoning from Orlando and the other 12 cities, and how the county applies the Live Local Act.

By Nathan Robinson, Founder, Plotzy Published 15 min read

Land in Orange County outside its 13 cities is zoned by the county under Chapter 38 of the Orange County Code. The county uses conventional letter districts (A-1, R-1AA, C-2, I-4), a flexible Planned Development (P-D) district, and neighborhood districts for older communities. Many map labels also carry a "Restricted" or "RSTD" prefix. Here is where to look and how to read what you find.

Where the official map and code live

  • InfoMap: the county's interactive map, linked from the Zoning Division page. The county points to it for finding a parcel ID.
  • Zoning GIS layer: shows current zoning for unincorporated Orange County, with planned development names and notes on restrictions for many parcels.
  • Chapter 38 on Municode. Section 38-77 is the use table and Section 38-1501 sets lot sizes, setbacks, and heights. The current version is dated September 16, 2026.
  • Zoning questions: the Zoning Division, (407) 836-3111 or Zoning@ocfl.net. Office visits need an appointment at least 24 hours ahead through FastTrack.
  • Rezoning questions: the Planning Division, 201 S. Rosalind Ave., 2nd Floor, (407) 836-5321 or planning@ocfl.net.
  • Plotzy: Orange County's zoning map and code, loaded parcel by parcel. Search an address to see the parcel's zone next to its owner, lot size, and last sale, or filter a search by zoning. Zoning AI (Production plan and up) answers what the code allows on that parcel, with the section cited. Plotzy is not an official source, so confirm anything a deal depends on with the county. Start a free trial.

A code change is coming. The Board adopted a new comprehensive plan (Vision 2050) and zoning code (Orange Code) on June 3, 2025, and the Florida Department of Commerce declared the plan null and void in July 2025. The Board readopted it on September 29, 2026, by a 5-2 vote. Vision 2050 is set to take effect December 21, 2026, with state approval. Until October 1, 2027, applicants can opt out and be reviewed under the current plan, Destination 2030. Until Vision 2050 and Orange Code take effect, Chapter 38 remains the zoning code, and the county's July 2026 Live Local procedures apply it. Check the Vision 2050 page before you file anything new.

First check: county or a city?

Orange County has 13 municipalities: Orlando, Apopka, Bay Lake, Belle Isle, Eatonville, Edgewood, Lake Buena Vista, Maitland, Oakland, Ocoee, Windermere, Winter Garden, and Winter Park. Chapter 38 covers only the county "not part of any municipality," and an Orlando mailing address does not tell you which government zones a parcel.

  • If the county zoning layer shows a district code, county rules apply. Land inside a city shows as "CITY," with the city named.
  • If the parcel is inside the City of Orlando, see our Orlando zoning guide.
  • For the other cities, use that city's own map and code.

How the county's districts are organized

The tables cover the codes on the county's zoning layer, with Chapter 38's names. Section 38-1501 leaves density and floor area ratio to the parcel's future land use designation in most districts. The NC, NAC, NR, R-L-D, and R-T districts set their own caps. Use counts come from the Section 38-77 use table.

Districts are grouped by the category Plotzy gives them, and a Plotzy parcel search can be filtered by any of these categories.

Residential

CodeDistrictLimitsAllowed by rightConditional
R-1AASingle-Family Dwelling. The largest-lot of the three R-1 districts.Density set by future land use; 10,000 sq ft minimum lot, 35-foot height.Single-family home, accessory dwelling unit, +27 more22 conditional uses
R-1ASingle-Family Dwelling. Single-family neighborhoods on mid-size lots.Density set by future land use; 7,500 sq ft minimum lot, 35-foot height.Single-family home, accessory dwelling unit, +27 more22 conditional uses
R-1Single-Family Dwelling. Single-family neighborhoods on the smallest R-1 lots.Density set by future land use; 5,000 sq ft minimum lot, 35-foot height.Single-family home, accessory dwelling unit, +27 more23 conditional uses
R-1AAAAResidential Urban. Large-lot single-family on half-acre lots.Density set by future land use; 21,780 sq ft (half-acre) minimum lot, 35-foot height.Single-family home, accessory dwelling unit, +26 more22 conditional uses
R-1AAAResidential Urban. Large-lot single-family on one-third-acre lots.Density set by future land use; 14,520 sq ft (one-third acre) minimum lot, 35-foot height.Single-family home, accessory dwelling unit, +27 more22 conditional uses
R-CECountry Estate. Large-lot rural residential.Density set by future land use; 1-acre (43,560 sq ft) minimum lot, 35-foot height.Single-family home, keeping horses, +31 more29 conditional uses
R-CE-2Rural Residential. Rural homes on 2-acre lots.Density set by future land use; 2-acre minimum lot, 35-foot height.Single-family home, keeping horses, +31 more29 conditional uses
R-CE-5Rural Country Estate Residential. Rural homes on 5-acre lots.Density set by future land use; 5-acre minimum lot, 35-foot height.Single-family home, keeping horses, +31 more29 conditional uses
R-2Residential. Duplexes and small multifamily, capped at four units per building.Density set by future land use; 4,500 sq ft lot for a single-family home, 8,000 for an attached duplex, 15,000 for four units, 35-foot height.Duplex, townhouse, +31 more27 conditional uses
R-3Multiple-Family Dwelling. Apartments and other multifamily housing.Density set by future land use; 4,500 sq ft lot for a single-family home, 15,000 for four or more units, 35-foot height.Multifamily, assisted living facility, +38 more30 conditional uses
R-TMobile Home Park. Mobile home parks.Up to 7 mobile home spaces per gross acre, 5-acre minimum park, 35-foot height.Mobile home park, home-based business, +18 more19 conditional uses
R-T-1Mobile Home Subdivision. Mobile homes and site-built homes on individual lots.Density set by future land use; 4,500 sq ft minimum lot, 35-foot height.Single-family home, mobile home, +27 more20 conditional uses
R-T-2Combination Mobile Home and Single-Family. Mobile homes and site-built homes mixed together.Density set by future land use; 6,000 sq ft minimum lot if zoned before 1/29/73, 21,780 sq ft if zoned after, 35-foot height.Single-family home, mobile home, +26 more20 conditional uses
R-L-DResidential Low-Density. Attached and detached homes with flexible lot designs such as zero lot lines.Up to 4 units per acre, 5 with a density credit; 2-acre minimum tract, no minimum lot size, two stories or 35 feet.Single-family home, duplex, +30 more22 conditional uses
U-R-3University Residential. Student housing near a college or university. The code writes UR-3.Density set by future land use; 15,000 sq ft minimum lot, 35-foot height.Student housing, multifamily, +10 more1 conditional use
NRNeighborhood Residential. Matches the same-named future land use designation and steps down from mixed-use areas.Up to 20 units per acre and 0.40 FAR; 4,500 sq ft single-family lot, 35 feet or 3 stories (50 feet or 4 stories for four or more units).Townhouse, multifamily, +35 more17 conditional uses

Ask Plotzy about setbacks, minimum living area, lake setbacks, and accessory dwelling unit rules on any residential parcel.

Agricultural

CodeDistrictLimitsAllowed by rightConditional
A-1Citrus Rural. Agricultural land and rural homes. See our A-1 explainer.Density set by future land use; half-acre (21,780 sq ft) minimum lot for a house, 2 acres for a mobile home, 35-foot height.Single-family home, commercial solar farm, +57 more62 conditional uses
A-2Farmland Rural. Farmland and rural homes. See our A-2 explainer.Density set by future land use; half-acre (21,780 sq ft) minimum lot for a house, 2 acres for a mobile home, 35-foot height.Single-family home, mobile home on 2 acres, +57 more62 conditional uses
A-RAgricultural-Residential. Rural homesites alongside agriculture.Density set by future land use; 2.5-acre (108,900 sq ft) minimum lot, 35-foot height.Single-family home, mobile home on 2.5 acres, +37 more32 conditional uses

Ask Plotzy about mobile home permits, livestock rules, off-street parking, and lake setbacks on any agricultural parcel.

Commercial and office

CodeDistrictLimitsAllowed by rightConditional
P-OProfessional Office. Offices and personal services.Intensity set by future land use; 10,000 sq ft minimum lot, 35-foot height.Dentist office, bank, +83 more33 conditional uses
C-1Retail Commercial. Neighborhood retail and services.Intensity set by future land use; 6,000 sq ft minimum lot, 50-foot height (35 within 100 feet of residential).Drive-thru restaurant, grocery store, +193 more22 conditional uses
C-2General Commercial. Broader commercial, including auto sales and repair.Intensity set by future land use; 8,000 sq ft minimum lot, 50-foot height (35 within 100 feet of residential).New and used car dealer, hotel or motel, +240 more24 conditional uses
C-3Wholesale Commercial. Wholesale, distribution, and heavier commercial. See our C-3 explainer.Intensity set by future land use; 12,000 sq ft minimum lot, 75-foot height (35 within 100 feet of residential).Distribution warehouse, truck terminal, +269 more22 conditional uses

Ask Plotzy about parking and loading, setbacks next to residential, minimum floor area, and lake setbacks on any commercial or office parcel.

Mixed use

Do this in Plotzy

Ask the zoning code a question and get a cited answer

Zoning AI reads the ordinance for you. Ask about permitted uses, setbacks, FAR, height, or parking for a specific parcel and get the answer with the section it came from.

  • Two-level zoning on every parcel, nationwide
  • Plain-English answers with section-level citations
  • Filter parcels by zoning before you spend a day on due diligence
See Zoning AI

Free trial

CodeDistrictLimitsAllowed by rightConditional
NCNeighborhood Center. Matches the same-named future land use designation and supports redevelopment of established communities.Up to 40 units per acre and 2.0 FAR; 8,000 sq ft minimum lot for nonresidential and mixed use, 65-foot height (80 for multifamily with ground-floor retail).Townhouse, grocery store, +170 more22 conditional uses
NACNeighborhood Activity Corridor. Matches the same-named future land use designation along corridors in established communities.Up to 25 units per acre and 1.0 FAR; 6,000 sq ft minimum lot for nonresidential and mixed use, 50-foot height (65 for multifamily with ground-floor retail).Townhouse, restaurant, +174 more21 conditional uses

Ask Plotzy about build-to lines, parking maximums, shared parking reductions, and architectural standards on any mixed-use parcel.

Industrial

CodeDistrictLimitsAllowed by rightConditional
IND-1ARestricted Industrial (I-1A). Light industry and warehousing with a narrower use list. The map writes IND for the code's I.Intensity set by future land use; no minimum lot size, 50-foot height (35 within 100 feet of residential).Distribution warehouse, hotel or motel, +124 more9 conditional uses
IND-1/IND-5Industrial (I-1/I-5). Light manufacturing and industry with limited impact on neighbors.Intensity set by future land use; no minimum lot size, 50-foot height (35 within 100 feet of residential).Distribution warehouse, cabinet making, +296 more15 conditional uses
IND-2/IND-3Industrial (I-2/I-3). General industry, adding uses such as concrete and block plants.Intensity set by future land use; no minimum lot size, 50-foot height (35 within 100 feet of residential) in the table, though a table footnote also cites two stories or 35 feet.Concrete block and brick plant, truck terminal, +310 more17 conditional uses
IND-4Industrial (I-4). Heavy industry, including uses no other district allows.Intensity set by future land use; no minimum lot size, 50-foot height (35 within 100 feet of residential).Chemical manufacturing, bulk petroleum storage, +322 more19 conditional uses
M-1M-1. Must be rezoned before any development permit (Section 38-76).None until rezoned.None until rezonedNone

Ask Plotzy about open storage, buffer yards, refuse area placement, and environmental performance standards on any industrial parcel.

Other districts

CodeDistrictLimitsAllowed by rightConditional
P-DPlanned Development. Uses are limited to the approved land use plan. See our PUD explainer.Set by the approved plan.Set by the approved planSet by the approved plan

Ask Plotzy about the approved land use plan and its conditions of approval on any planned development parcel.

Two map labels need care:

  • "Restricted" or "RSTD" (for example RSTD C-1) marks a rezoning approved with restrictions under Section 38-4, such as use limits, larger setbacks, or buffers. They run with the land, and the layer's notes often point to the hearing file.
  • A "-C" suffix on an R-1 code (R-1A-C, R-1AA-C) is grouped as "Residential Cluster" in the layer's legend.

Overlays and special districts

  • Overlay districts: I-Drive, Pine Hills Neighborhood Improvement District, Transit Oriented Development (TOD), Lake Avalon Rural Settlement, and corridor overlays for West State Road 50, South Orange Avenue, Conway Road, and State Road 436/State Road 50.
  • Planned development codes: the Village Planned Development Code and the Horizon West Town Center code, which has its own land use table (Section 38-77.1).
  • Airport zoning is in Chapter 7, separate from Chapter 38.

Zoning verification letters

The Zoning Division's letter confirms a property's zoning and whether it is consistent with the comprehensive plan.

  • Send a cover letter with the parcel ID and address to Zoning@ocfl.net (subject "Zoning Verification Letter") or by mail to 201 S. Rosalind Ave., Orlando, FL 32801. Payment instructions follow by email.
  • Fees are per parcel: $132 for conventional zoning, $229 inside a Planned Development.
  • Processing takes up to 30 days after payment. Track status in Fast Track Zoning Review.

How rezoning works in the county

  1. Check the land use. Use Find My Parcel and the Planning and Zoning Guide to confirm your target district fits the future land use designation. If not, you need a land use amendment first.
  2. Apply. Send the application, survey, legal description, disclosure forms, and fee ($1,577 for a conventional rezoning) to rezoning@ocfl.net.
  3. Staff review. A planner makes a recommendation. A community meeting may be required, and nearby owners get mailed notice.
  4. Planning and Zoning Commission hearing and a recommendation, which may include restrictions.
  5. Board of County Commissioners decision. The county lists 4 to 6 months of review.

A Planned Development land use plan goes through the Development Review Committee, then the commission, then the Board at least 10 days later (Section 38-1203). Variances and special exceptions go to the Board of Zoning Adjustment, which recommends to the Board; use variances are prohibited. See how to rezone a property and how long rezoning takes.

What the Live Local Act changes in the county

Florida's Live Local Act requires counties to approve qualifying projects administratively (at least 40 percent of units affordable rentals for 30 years) on commercial, industrial, and mixed-use land. Orange County's procedures (Resolution 2026-M-35, effective July 1, 2026) set out how:

  • Eligible districts: C-1, C-2, C-3, P-O, I-1A, I-1/I-5, I-2/I-3, I-4, NC, NAC, and the parts of a P-D approved for commercial, industrial, or mixed use. Public land and some religious land also qualify.
  • Density up to 50 units per acre and a floor area ratio of 4.5.
  • Height up to the highest allowed within one mile, or three stories, whichever is higher, with a possible cap next to single-family developments.
  • Parking at 1.5 or 2 spaces per unit, cut 15 percent near transit on request.
  • Process: a plan filed with the Development Review Committee, a 10 business day review cycle, a posted notice, and a recorded affordability agreement before the approval letter.
  • Excluded: airport-impacted areas, the Wekiva Study Area, and land within a quarter mile of a military installation, among others.

Future land use and the comprehensive plan

Unincorporated Orange County's operative comprehensive plan is Destination 2030. Its future land use map sets the density ceiling for most zoning districts, from 4 units per acre in Low Density Residential to 50 in High Density Residential, and the correlation table in Policy FLU8.1.1 lists which zoning districts fit each designation. Florida law requires zoning to be consistent with the plan, so a rezoning that does not fit the designation also needs a future land use amendment. The biggest change is Vision 2050: readopted September 29, 2026, it is set to take effect December 21, 2026, with state approval, and developers can opt out until October 1, 2027. See the Orange County future land use map and comprehensive plan guide.

How to check a specific parcel

The quickest check is to search the address in Plotzy, which shows the parcel's zone on a map; Zoning AI answers what the code allows there. To confirm it with the county:

  1. Find the parcel ID through the Property Appraiser or InfoMap, and confirm it is not marked "CITY."
  2. Note the full label, including any RSTD prefix, -C suffix, or planned development name.
  3. Read Sections 38-77 and 38-1501 and any overlay, plus the approved plan or hearing file for P-D and restricted parcels.
  4. Request a zoning verification letter for anything a deal depends on.

Frequently asked questions

Where is the official Orange County zoning map?

The Zoning Division page on ocfl.net links to InfoMap. The county also publishes its zoning layer as open GIS data.

What does R-1AA mean?

R-1AA is a Single-Family Dwelling district, the largest-lot of the three R-1 districts. Its lot size and width minimums are in Section 38-1501.

What does RSTD mean on the zoning map?

The parcel was rezoned with added restrictions under Section 38-4. Read the hearing file before relying on the base district.

Does the Live Local Act apply in unincorporated Orange County?

Yes. The county processes projects under Board-adopted procedures, most recently updated effective July 1, 2026.

Sources

The codes, maps, and agency documents cited on this page were checked on November 15, 2026. Codes and county policies change often, so confirm the current version before relying on any detail. This page is general information, not legal advice.

Related reading