City zoning maps

Port St. Lucie Zoning Map: How to Look Up Zoning in Port St. Lucie, Florida

Where the City of Port St. Lucie's zoning map and Chapter 158 zoning code live, what the RS, RM, CN, CG, CH, CS, WI, IN, LMD, PUD, and MPUD districts mean, how Tradition and the other master-planned areas are zoned, and how city zoning differs from unincorporated St. Lucie County.

By Nathan Robinson, Founder, Plotzy Published 13 min read

The City of Port St. Lucie zones land under Chapter 158, the Zoning Code, in Title XV (Land Usage) of the City Code. The code sets 24 districts, from General Use (GU) to Master Planned Unit Development (MPUD). The city grew from more than 80,000 platted residential lots (per its 2020 to 2040 plan), and its large master-planned communities, such as Tradition, are built under MPUD master plans and regulation books. Here is where to look and how to read what you find.

Where the official map and code live

  • Zoning Map: the city's online map. Click the "Zoning" tab for districts and the "Future Land Use" tab for the land use category.
  • Official Zoning Map: the "City of Port St. Lucie, St. Lucie County, Florida Official Zoning Map," adopted as part of Chapter 158 and kept by the Planning and Zoning Department (Sections 158.022 and 158.023).
  • Zoning Code on Municode: Chapter 158. Each district section lists its permitted uses, special exception uses, lot size, coverage, and height.
  • Comprehensive Plan 2050: the city's comprehensive plan. Its future land use category sets density and intensity, and Policy 1.1.4.13 lists the zoning districts that fit each category.
  • Zoning questions: the Planner of the Day, 772-871-5213, weekdays 8 a.m. to 12 p.m. and 1 to 5 p.m.
  • Plotzy: Port St. Lucie's zoning map and code, loaded parcel by parcel. Search an address to see the parcel's zone next to its owner, lot size, and last sale, or filter a search by zoning. Zoning AI (Production plan and up) answers what the code allows on that parcel, with the section cited. Plotzy is not an official source, so confirm anything a deal depends on with the city. Start a free trial.

The Planning and Zoning Department is at 121 SW Port St. Lucie Blvd., Building B. Pre-application meetings for new projects cost $700.

First check: city, county, or Fort Pierce?

Port St. Lucie is in St. Lucie County. Its 2020 to 2040 plan (archived copy dated May 27, 2026) says the city borders unincorporated St. Lucie County and the City of Fort Pierce to the north, unincorporated county land to the west, and Martin County to the south. A Port St. Lucie mailing address does not tell you which government zones a parcel.

  • The city says to check jurisdiction on the St. Lucie County Property Appraiser's record card (search by address, then open "Record Card"), or call 772-462-1000.
  • Land in unincorporated St. Lucie County follows the county's own Land Development Code and maps.
  • Fort Pierce is a separate city with its own zoning.

How Port St. Lucie's districts are organized

The tables cover the 24 districts in Section 158.020, with Chapter 158's names. Five older districts (RR, CSC, CR, FI, and HI) were removed in 1999, and land still carrying them is legal nonconforming. In the multifamily districts, the number in the name, such as RM-11, is the maximum gross density in units per acre.

These tables leave out use counts. Chapter 158 has no single use table: each district lists its own uses, and several lists pull in other districts' lists. CS allows "any permitted use" in CG except those it lists as special exceptions, and LMD allows the permitted uses of P and RM-11. Counting items would not compare cleanly across districts, so read the district's section for its full list.

Districts are grouped below into broad categories, and a Plotzy parcel search can be filtered by zoning category.

Residential

CodeDistrictLimits
REEstate Residential. Single-family homes on large lots.20,000 sq ft lot, 100-foot width, 30 percent building coverage, 35-foot height, 1,700 sq ft minimum living area.
RS-1Single-Family Residential. Single-family homes on larger lots.15,000 sq ft lot and 75-foot width for a home, 35-foot height, 1,700 sq ft minimum living area.
RS-2Single-Family Residential. The platted single-family neighborhoods.10,000 sq ft lot and 60-foot width for a home, 35-foot height, 1,200 sq ft minimum living area.
RS-3Single-Family Residential. Single-family homes on smaller lots.7,500 sq ft lot and 60-foot width for a home, 35-foot height, 1,200 sq ft minimum living area.
RM-5Multiple-Family Residential. Apartments, townhomes, and single-family homes.5 units per acre; 20,000 sq ft multifamily lot, 100-foot width; 35 percent coverage, 50 percent impervious; 35-foot height.
RM-8Multiple-Family Residential. Apartments, townhomes, and cluster homes.8 units per acre (5 for detached single-family); 20,000 sq ft multifamily lot, 100-foot width; 35 percent coverage; 35-foot height.
RM-11Multiple-Family Residential. Apartments and townhomes at medium density.11 units per acre (5 for detached single-family); 20,000 sq ft multifamily lot, 150-foot width; 35 percent coverage; 35-foot height.
RM-15Multiple-Family Residential. The highest-density standard district.15 units per acre (5 for detached single-family); 30,000 sq ft multifamily lot, 150-foot width; 35 percent coverage; 35-foot height.
RMHMobile Home Residential. Mobile home parks.5 units per acre; 10-acre park with 175 feet of street frontage; 35 percent coverage; 25-foot height.

Ask Plotzy about setbacks, minimum living area, impervious surface limits, and townhouse standards (Section 158.218) on any residential parcel.

Commercial and office

CodeDistrictLimits
PProfessional. Offices, studios, and personal services such as barber shops.20,000 sq ft lot, 100-foot width, 40 percent coverage, 80 percent impervious, 35-foot height; taller buildings need a special exception.
CNNeighborhood Commercial. Enclosed retail, services, offices, and restaurants without drive-throughs.20,000 sq ft lot, 100-foot width, 4-acre maximum lot, 40 percent coverage, 80 percent impervious, 25-foot height.
CGGeneral Commercial. Retail, offices, restaurants, hotels, and pharmacies; car washes, fuel sales, and drive-throughs by special exception.20,000 sq ft lot, 100-foot width, 40 percent coverage, 80 percent impervious, 35-foot height.
CHHighway Commercial. Service stations, truck stops, hotels, and restaurants with drive-throughs for highway travelers.30 percent coverage, 80 percent impervious, 50-foot height.
CSService Commercial. Most CG uses plus lumber yards, contractor yards, open storage, warehousing, and self-storage.20,000 sq ft lot, 100-foot width, 40 percent coverage, 80 percent impervious, 35-foot height.

Ask Plotzy about setbacks next to residential land, minimum building size, drive-through rules, and Land Use Conversion Manual standards on any commercial or office parcel.

Mixed use

CodeDistrictLimits
LMDLimited Mixed Use. Converts single-family lots of record along major roads to office, multifamily, and small retail. Allows P and RM-11 permitted uses, enclosed retail, and restaurants up to 5,000 sq ft.11 units per acre; 20,000 sq ft minimum lot; 40 percent coverage, 80 percent impervious; 35-foot height. Any use over 5,000 sq ft needs a special exception.

Ask Plotzy about conversion area standards, setbacks, minimum unit sizes, and the 5,000 sq ft use cap on any mixed-use parcel.

Do this in Plotzy

Ask the zoning code a question and get a cited answer

Zoning AI reads the ordinance for you. Ask about permitted uses, setbacks, FAR, height, or parking for a specific parcel and get the answer with the section it came from.

  • Two-level zoning on every parcel, nationwide
  • Plain-English answers with section-level citations
  • Filter parcels by zoning before you spend a day on due diligence
See Zoning AI

Free trial

Industrial

CodeDistrictLimits
WIWarehouse Industrial. Trade shops, light manufacturing, warehousing, wholesale, breweries, and self-storage.20,000 sq ft lot, 100-foot width, 50 percent coverage, 80 percent impervious, 35-foot height (towers excepted).
INIndustrial. Manufacturing, research and development, warehousing, and distribution; heavy industry by special exception.20,000 sq ft lot, 160-foot width, 50 percent coverage, 80 percent impervious, 35-foot height (towers excepted).

Ask Plotzy about open storage screening, setbacks, and self-storage standards (Section 158.227) on any industrial parcel.

Agricultural

CodeDistrictLimits
GUGeneral Use. Undeveloped land whose future use is not yet set. Allows farming, livestock, nurseries, stables, and a single-family home.10-acre parcel and 330-foot width for a home, 10 percent coverage; 20,000 sq ft and 30 percent for other uses; 35-foot height.

Ask Plotzy about special exception uses such as mining or solar generation, and setbacks, on any agricultural parcel.

Other districts

CodeDistrictLimits
OSROpen Space Recreational. Parks, golf courses, and the Botanical Gardens.35 percent coverage, 35-foot height.
OSCOpen Space Conservation. Natural land with trails, boardwalks, and boat ramps.No minimum lot; coverage and height set at site plan review.
IInstitutional. Schools, assisted living, nursing homes, cemeteries, and public buildings; hospitals and colleges by special exception.20,000 sq ft lot, 100-foot width, 30 percent coverage, 35-foot height.
UUtility. Water and wastewater plants, substations, stormwater, and public buildings.10,000 sq ft lot, 80-foot width, 30 percent coverage, 80 percent impervious, 50-foot height.
PUDPlanned Unit Development. Uses and standards set by the conceptual plan City Council approves. See our PUD explainer.2-acre minimum; other standards set by the approved plan.
MPUDMaster Planned Unit Development. Large new communities in the New Community Development land use, such as the Tradition/Western Grove district.Set by the MPUD conceptual master plan and regulation book.

Ask Plotzy about setbacks, site plan conditions, and PUD or MPUD regulation book standards on any of these parcels.

Special exception uses in every district need City Council approval after a public hearing (Sections 158.255 to 158.262). Several districts allow a taller building in a residential, office, and institutional (ROI) conversion area named in the Land Use Conversion Manual. Within a PUD over 5 acres, the comprehensive plan allows heights up to 75 feet with an approved master plan.

Master-planned communities: Tradition, Southern Grove, and the western districts

The city's large master-planned communities carry the New Community Development (NCD) future land use, where the plan allows MPUD, GU, and OSC zoning. Here is how the code and plan govern them:

  • DRI first: development in an NCD district must be part of a Development of Regional Impact approval under Chapter 380, F.S. (Policy 1.2.7.1). An MPUD is defined as NCD land included in or approved as part of a DRI (Section 158.186).
  • Regulation book: construction in an NCD district needs an approved MPUD conceptual master plan and regulation book, which lists permitted uses and standards. Where the book conflicts with the city's land development regulations, the book prevails (Policy 1.2.6.1).
  • Named districts: the plan sets caps for four NCD districts. Tradition/Western Grove: 11,307 homes, 2,358,810 sq ft nonresidential, 150 hotel rooms. Southern Grove: 7,674 homes, 13,187,925 sq ft nonresidential, 1,051 hotel rooms, 300 hospital beds. Riverland/Kennedy: 11,700 homes and 3,942,495 sq ft. Wilson Groves: 7,700 homes and 4,092,372 sq ft.
  • Transfers: homes, hotel rooms, and floor area can move between sub-districts without a plan amendment, up to 50 percent of the receiving sub-district's allocation, with owner consent and a zoning amendment (Policy 1.2.1.2).
  • Minimum size: an MPUD for a Residential sub-district needs at least 50 acres (Section 158.187).

To learn what a specific parcel in Tradition or another MPUD allows, get that MPUD's regulation book and the DRI development order from Planning and Zoning.

Overlays and special districts

  • Land Use Conversion Manual: single-family lots along Port St. Lucie Boulevard, Gatlin Boulevard, Paar Drive, Bayshore Boulevard, Biltmore Street, South Macedo Boulevard, Prima Vista Boulevard, St. James Drive, Lennard Road, and Becker Road follow conversion standards when rezoned (Section 158.316).
  • Becker Road Overlay Design Standards: posted on the city's applications page.
  • Community Redevelopment Area: the plan lets the city adopt special district or overlay zoning there, consistent with the CRA plan, and it includes the Walton & One project.
  • Gatlin Commons Regional Activity Center (about 124.59 acres) and Lulfs Groves Business Park Area (about 464.5 acres): plan overlays with their own use and development allowances.

Zoning verification letters

The Planning and Zoning Department's Zoning Verification Request form (revised October 1, 2026) states the zoning and the future land use of a parcel. It does not approve a business. Email the form to planning@cityofpsl.com and call 772-873-6486 to pay the $200 non-refundable fee. For more detail, the city has a separate Land Use and Miscellaneous Research Request. See the guide to getting a zoning verification letter.

How rezoning works in Port St. Lucie

Article XVI of Chapter 158 sets the process:

  1. Who can apply: City Council, the Planning and Zoning Board, city departments, or owners of at least 51 percent of the land area.
  2. Application with a legal description, current and proposed districts, and a statement of need, submitted through the city's online portal (fusion.cityofpsl.com) with the filing fee.
  3. Planning and Zoning Board public hearing, with newspaper notice at least 10 days before. The board recommends and states whether the request is consistent with the comprehensive plan. It meets the first Tuesday of each month at 6 p.m.
  4. City Council public hearing, with newspaper notice at least 7 days before. For a rezoning under 5 percent of the city's land area, Council can adopt the ordinance at the close of one hearing.

A denied rezoning cannot be refiled for the same change for 12 months, or for another rezoning for 6 months, unless Council waives the limit. MPUD rezonings add a conceptual master plan and regulation book, reviewed by the Site Plan Review Committee. Variances go to the Planning and Zoning Board or the Zoning Administrator. See how to rezone a property and how long rezoning takes.

What the Live Local Act means here

Florida's Live Local Act, at section 166.04151(7), requires cities to allow multifamily and mixed-use residential on land zoned commercial, industrial, or mixed use. That includes the parts of a PUD permitted for those uses. At least 40 percent of units must be affordable rentals for 30 years. The statute requires administrative approval, allows density up to the city's highest allowed, and allows a height up to the tallest allowed within 1 mile or 3 stories, whichever is higher. It also requires each city to post its procedures on its website. No Live Local Act policy turned up on the city's website in November 2026, so ask Planning and Zoning how it processes these projects.

Future land use and the comprehensive plan

The city's plan is the Comprehensive Plan 2050, whose element pages are dated September 28, 2026. Its Future Land Use Map gives each parcel a category, such as RL (5 units per acre), RM (11), RH (15), CG, LI, or NCD (1 to 35 units per acre by sub-district). Policy 1.1.4.13 lists the zoning districts that fit each category; RL, for example, fits GU, RE, RS-1 through RM-5, and RMH. Florida law requires zoning to be consistent with the plan, so a rezoning that does not fit the category also needs a future land use amendment. The city's plan page does not give an adoption ordinance for the 2050 plan, so confirm its status with staff. See the Port St. Lucie future land use map and comprehensive plan guide.

How to check a specific parcel

The quickest check is to search the address in Plotzy, which shows the parcel's zone on a map; Zoning AI answers what the code allows there. To confirm it with the city:

  1. Confirm the parcel is inside the city on the Property Appraiser's record card.
  2. Note the zoning district on the city's Zoning Map and the future land use on its "Future Land Use" tab.
  3. Read the district's section in Chapter 158. For a PUD or MPUD, get the approved plan and regulation book.
  4. Call the Planner of the Day, and request a zoning verification letter for anything a deal depends on.

Frequently asked questions

Where is the official Port St. Lucie zoning map?

The city's online Zoning Map shows districts on its "Zoning" tab. The Official Zoning Map adopted with Chapter 158 is kept by the Planning and Zoning Department.

What is RS-2 zoning in Port St. Lucie?

RS-2 is a Single-Family Residential district. A home needs a 10,000 sq ft lot with 60 feet of width, and buildings are limited to 35 feet.

How is Tradition governed?

Tradition is in the Tradition/Western Grove New Community Development district. Construction there follows an MPUD conceptual master plan and regulation book, within the caps of the comprehensive plan and the DRI development order.

Is my Port St. Lucie address in the city?

Not always. Some addresses are in unincorporated St. Lucie County, so check the Property Appraiser's record card first.

Sources

The codes, maps, and agency documents cited on this page were checked on November 19, 2026. Codes and city policies change often, so confirm the current version before relying on any detail. This page is general information, not legal advice.

Related reading