City zoning maps

Naples Zoning Map: How to Look Up Zoning in Naples, Florida

Where the City of Naples' zoning map and Chapter 58 zoning code live, what the RE, R1, R3, HC, C1, C2, C3, D, BP, PD, and PS districts mean, how city zoning differs from unincorporated Collier County, and how the city applies the Live Local Act.

By Nathan Robinson, Founder, Plotzy Published 14 min read

The City of Naples zones land under Chapter 58 of its Land Development Code, which is Subpart B (Chapters 44 to 58) of the city's Code of Ordinances. Each district has its own division with a purpose, a list of permitted uses, a list of conditional uses, and its own lot, height, and density rules. Here is where to look and how to read what you find.

Where the official map and code live

  • Zoning Map: the city's online zoning map, linked from the Planning Department page. Enter an address to see the district.
  • Official zoning map or atlas: under Sec. 58-1, it is the final authority on current zoning. The city clerk is its custodian, and council-approved changes are entered on it.
  • Land Development Code on Municode (version of November 12, 2026). Chapter 58, Article II holds the districts; Article III holds the special overlay districts. Procedures are in Chapter 46.
  • Comprehensive Plan: the city's plan, also on Municode. Its Future Land Use Element sets density and building coverage for each land use designation.
  • Zoning questions: the Planning Department, 295 Riverside Circle, 239-213-1050 or Planningemail@naplesgov.com, Monday to Friday, 8 a.m. to 5 p.m.
  • Plotzy: Naples' zoning map and code, loaded parcel by parcel. Search an address to see the parcel's zone next to its owner, lot size, and last sale, or filter a search by zoning. Zoning AI (Production plan and up) answers what the code allows on that parcel, with the section cited. Plotzy is not an official source, so confirm anything a deal depends on with the city. Start a free trial.

A pre-application meeting with Planning staff is required to decide which development review steps a project needs.

First check: City of Naples or Collier County?

Naples zoning covers only the incorporated land and water of the city (Sec. 58-1). Land outside the city limits is zoned by Collier County, whose Land Development Code applies to the unincorporated county (Collier LDC Sec. 1.04.01). A Naples mailing address does not tell you which government zones a parcel.

  • Check the city's zoning map first. If the parcel is not in a city district, it is likely under Collier County zoning; the county's Zoning Division is at 239-252-2400.
  • Some corridors are split between the two. The city's Corridor Management Overlay for Goodlette-Frank Road and Golden Gate Parkway recognizes that two separate jurisdictions govern land along them (Sec. 58-1042).
  • When land is annexed, the city's comprehensive plan converts county districts to city ones. For example, county RSF-3 becomes R1-10, RMF-12 becomes R3-12, and C-2 becomes HC.

How Naples' districts are organized

Single-family districts start with R1. In R1-15, R1-10, R1-10A, and R1-7.5, the number matches the minimum lot size in thousands of square feet. Multifamily districts start with R3, and the number matches the maximum units per net acre. The two R3T districts also allow limited transient lodging. Most commercial districts cap buildings at three stories and 42 feet, measured from the first-floor FEMA elevation. Most also set a lower limit next to or across the street from R1 land, two stories in HC, C1, C1-A, C2, and C2-A.

Districts are grouped below into broad categories, and a Plotzy parcel search can be filtered by zoning category. Use counts below come from each district's "Uses permitted" and "Conditional uses" sections in Article II, counted the same way for every district, as described below the tables.

Residential

CodeDistrictLimitsAllowed by rightConditional
RERural Estates. Low-density homes in a semi-rural setting, with limited farm animals.2.25-acre minimum lot, 30-foot height.Single-family home, guest unit, +4 more1 conditional use
R1-EResidence, beach estate. Larger lots and homes than other districts.67,500 sq ft minimum lot, 35-foot height.Single-family home, one guest unit, +1 more2 conditional uses
R1-15AResidence. Single-family homes in listed Port Royal plats.One platted lot, 30-foot height.Single-family home, accessory structures2 conditional uses
R1-15Residence. Single-family homes.15,000 sq ft minimum lot, 30-foot height.Single-family home, accessory structures2 conditional uses
R1-10Residence. Single-family homes.10,000 sq ft minimum lot, 30-foot height.Single-family home, accessory structures2 conditional uses
R1-10AResidence. Single-family homes, with added fence rules.10,000 sq ft minimum lot, 30-foot height.Single-family home, accessory structures2 conditional uses
R1-7.5Residence. Single-family homes on the smallest R1 lots.7,500 sq ft minimum lot, 30-foot height.Single-family home, accessory structures1 conditional use
R3-6Multifamily. Single-family homes and low-profile apartments.6 units per net acre, 6,000 sq ft lot, 30-foot height.Single-family home, multifamily, +1 more4 conditional uses
R3-12Multifamily. Homes and one- to three-story apartments.12 units per net acre, 6,000 sq ft lot, 30-foot height (two stories next to or across an alley from R1).Single-family home, multifamily, +1 more4 conditional uses
R3T-12Multifamily. Low-rise apartments with limited transient lodging.12 units per net acre, 15,000 sq ft lot, 30-foot height.Single-family home, multifamily, +1 more5 conditional uses
R3-15Multifamily. Mid-rise apartments.15 units per net acre, 15,000 sq ft lot, 60-foot height, plus 12 feet with ground-floor parking.Single-family home, multifamily, +1 more4 conditional uses
R3-15 (CS)Multifamily, Coquina Sands. Mid-rise district with a lower height cap.15 units per net acre, 15,000 sq ft lot, two habitable stories up to 35 feet to the ceiling.Single-family home, multifamily, +1 more4 conditional uses
R3-15 (MOR)Multifamily, Moorings. Mid-rise district with its own height cap.15 units per net acre, 15,000 sq ft lot, three habitable stories up to 50 feet to the ceiling.Single-family home, multifamily, +1 more4 conditional uses
R3-18Multifamily. Where the city's tallest buildings are allowed.18 units per net acre, 25,000 sq ft lot, 75-foot height, plus 12 feet with ground-floor parking.Single-family home, multifamily, +1 more4 conditional uses
R3T-18Multifamily. Tall apartments with limited transient lodging.18 units per net acre, 25,000 sq ft lot, 75-foot height, plus 12 feet with ground-floor parking.Single-family home, multifamily, +1 more6 conditional uses

Ask Plotzy about minimum yards, lot width, minimum floor area, maximum building area, and guest unit rules on any residential parcel.

Commercial and office

CodeDistrictLimitsAllowed by rightConditional
HCHighway Commercial. General commercial along arterial highways, built as integrated units.30,000 sq ft lot, three stories and 42 feet, 30% lot coverage.General retail, medical office, +10 more20 conditional uses
C1Retail Shopping. Prestige shopping areas with limited residential.No minimum lot area, three stories and 42 feet, 45% lot coverage.Small-scale retail, financial institution, +11 more10 conditional uses
C1-ACommercial Core. Prestige shopping, financial, real estate, and office uses.No minimum lot area, three stories and 42 feet, 45% lot coverage.Small-scale retail, medical office, +11 more9 conditional uses
C2General Commercial. Broad retail, services, and offices, with limited lodging.No minimum lot area, three stories and 42 feet, 40% lot coverage. Upper-floor homes up to 12 units per net acre as a conditional use.General retail, restaurant, +15 more24 conditional uses
C2-AWaterfront Commercial. Marine-oriented uses on the Naples Bay waterfront.10,000 sq ft lot, three stories and 42 feet, 50% coverage for marinas and 40% for other buildings.Marina, boatyard, +15 more8 conditional uses
C3Heavy Commercial. Building and service trades, wholesale, storage, and repair.No minimum lot area, three stories and 42 feet, 50% lot coverage.All C2 permitted uses, new or used auto sales, +12 more7 conditional uses
C4Airport Commercial. Naples Municipal Airport and related uses, under an approved master plan.No minimum lot area, three stories and 42 feet, 40% lot coverage.Airport terminals, aircraft sales and service, +3 more4 conditional uses
MMedical. Medical offices and facilities.No minimum lot area, 30-foot height (two stories next to R1), 25% coverage for residential buildings.Medical office, pharmacy, +3 more5 conditional uses
OOffice. Offices that buffer homes from commercial areas.No minimum lot area, 30-foot height (two stories next to R1), 40% lot coverage.Professional office, medical office, +1 moreNone listed

Ask Plotzy about minimum yards, minimum floor area, landscaping, and the two-story limit next to R1 land on any commercial parcel.

Mixed use

CodeDistrictLimitsAllowed by rightConditional
DDowntown. Commercial, office, cultural, and residential uses, with build-to lines.12 units per acre, 15,000 sq ft for new lots (2,000 for fee-simple townhome lots), three stories and 42 feet.Homes above a ground-floor commercial use, restaurant, +26 more20 conditional uses

Ask Plotzy about setback zones and build-to lines, on-street parking allocation, minimum unit sizes, and outdoor display rules on any downtown parcel.

Do this in Plotzy

Ask the zoning code a question and get a cited answer

Zoning AI reads the ordinance for you. Ask about permitted uses, setbacks, FAR, height, or parking for a specific parcel and get the answer with the section it came from.

  • Two-level zoning on every parcel, nationwide
  • Plain-English answers with section-level citations
  • Filter parcels by zoning before you spend a day on due diligence
See Zoning AI

Free trial

Industrial

CodeDistrictLimitsAllowed by rightConditional
IIndustrial. Storage, repair, manufacturing, processing, wholesaling, and trucking.No minimum lot area, three stories and 42 feet, 60% lot coverage.Retail, service, and wholesale, maintenance and repair, +5 more3 conditional uses
BPBusiness Park. Light industrial, commercial, and professional uses near one another.20,000 sq ft lot, three stories and 42 feet, 60% lot coverage.Light industrial, contractors' fabrication and storage, +17 more8 conditional uses

Ask Plotzy about minimum yards, minimum floor area, screening of outdoor storage, and parking on any industrial parcel.

Other districts

CodeDistrictLimitsAllowed by rightConditional
PSPublic Service. Public and semipublic institutional, recreational, and service facilities.30,000 sq ft lot (none for city utility land), 30-foot height for principal buildings, 45% lot coverage.None; every use needs a conditional use approval11 conditional uses
CConservation. Vital natural areas such as grass beds, marshes, and beaches.Development that could harm the area is not permitted (Sec. 58-864).Natural uses set by subcategory in Division 29Set by Division 29
TCTransitional Conservation. Land with resource value that allows limited development.Set by Division 29.Natural and low-intensity uses set by subcategory in Division 29Set by Division 29
PDPlanned Development. Rules set by the plan City Council approves. See our PUD explainer.Density limited by the comprehensive plan, or 8 units per net acre where the plan is silent. Commercial buildings three stories and 42 feet.Set by the approved plan.Set by the approved plan.

Ask Plotzy about PD construction deadlines, conservation submittal requirements, and public service lot rules on any of these parcels.

Use counts come from each district's "Uses permitted" and "Conditional uses" sections. Each numbered item counts once. Where a section names uses in a sentence without numbering them, each named use counts once. C3's first permitted use brings in every C2 permitted use and counts as one item. Many districts also let the Planning Advisory Board and City Council approve unlisted uses similar to the listed conditional uses; those are not counted. A conditional use granted by City Council expires after 12 months unless a building permit is issued or the use begins (Sec. 46-34). Density in the R3 districts is per net acre, as each district's section states.

Overlays and special districts

  • Cone of Influence: rules for hazardous substances, wells, and stormwater around wellfields.
  • Corridor Management Overlay: added setback, height, sign, access, and landscaping standards on Goodlette-Frank Road and Golden Gate Parkway.
  • Airport Overlay District: airspace protection and noise zones around Naples Municipal Airport. Proposals that could be obstructions are reviewed by the airport authority's executive director.
  • 3rd Street Commercial Area and 5th Avenue South: special overlays for the two shopping districts, with their own rules for signs, vending carts, and new buildings.
  • Recreational Vehicle Storage Overlay (RVSOD): RV storage rules applied neighborhood by neighborhood, shown on the map as, for example, "R1-10, RVSOD."

See our overlay district definition.

Zoning verification letters

A zoning verification letter confirms a property's current zoning and the uses allowed in its district (Sec. 46-44). The Planning Department says the property owner may request one, and the fee for a zoning confirmation letter is $200. Ask Planning, 239-213-1050, how to submit a request. See the guide to getting a zoning verification letter.

How rezoning works in Naples

Section 46-32 sets the process:

  1. Pre-application meeting: the Planning Department requires one to set the review steps for a development.
  2. Petition: the owner, the Planning Advisory Board, or City Council may start a rezoning. File with the city manager at least 44 days before the board meeting, or 90 days for a planned development over 5 acres.
  3. Planning Advisory Board public hearing. The board sends a written recommendation to City Council.
  4. City Council decides by ordinance and may add conditions. A rezoning needs the votes of four council members.

The city will not consider a rezoning of less than 5 acres unless it extends an existing district boundary or is to the C or PS district. After a denial, the same rezoning cannot be heard for 12 months, and any other rezoning of the property for 6 months. The exception is a rezoning that brings the property into line with the comprehensive plan. See how to rezone a property and how long rezoning takes.

What the Live Local Act changes here

Florida's Live Local Act requires cities to allow multifamily and mixed-use residential on land zoned commercial, industrial, or mixed use when at least 40 percent of units are affordable rentals for 30 years. Each city must also post a policy on administrative approval. Naples' policy, adopted by Resolution 2025-15555 on February 20, 2025, says:

  • Standards: projects proposed under the Live Local Act follow the R3-12 Multifamily District development standards.
  • Process: projects are submitted and reviewed administratively through site plan review under Sec. 46-33.
  • City land: the city lists one parcel it owns as appropriate for affordable housing, 0.58 acres at 170 10th St. N., a 2024 Community Redevelopment Agency acquisition.

The statute also sets minimum density and height for qualifying projects. Compare the city's policy with the current statute, Fla. Stat. 166.04151(7), before relying on it.

Future land use and the comprehensive plan

The City of Naples Comprehensive Plan's Future Land Use Element gives each parcel a designation, and Policy 1-1 sets its density or building coverage. Residential designations run from one unit per 1.5 acres in Beach Front Estates to 18 units per acre in High Density Residential. The Tower designation allows up to 25, as further limited by a PD or developer's agreement. The plan says land must be zoned in a district that permits a use before it can be used that way. The map shows the most intense uses that should be allowed. A citywide rewrite, Naples 2045, is still under review, with hearings set for 2027. See the Naples future land use map and comprehensive plan guide.

How to check a specific parcel

The quickest check is to search the address in Plotzy, which shows the parcel's zone on a map; Zoning AI answers what the code allows there. To confirm it with the city:

  1. Confirm the parcel is inside the city on the city's zoning map. If it is not, check with Collier County.
  2. Note the district and any overlay, such as RVSOD or the Corridor Management Overlay.
  3. Read the district's division in Chapter 58, Article II, and any Article III overlay. For a PD, get the approved development plan.
  4. Check the future land use designation, and ask for a zoning verification letter for anything a deal depends on.

Frequently asked questions

Where is the official Naples zoning map?

The official zoning map or atlas, kept by the city clerk, is the final authority (Sec. 58-1). The Planning Department links an online zoning map where you can search by address.

What does R3-12 mean in Naples?

R3-12 is a multifamily district that allows single-family homes and apartments up to 12 units per net acre and 30 feet tall. It is also the standard the city applies to Live Local Act projects.

What is the D district in Naples?

D is the Downtown district, a mixed-use district for commercial, office, cultural, and residential uses. Buildings are limited to three stories and 42 feet, and residential density to 12 units per acre (Secs. 58-907 and 58-910).

Is my Naples address in the City of Naples?

A mailing address does not show whether a parcel is inside the city limits. Check the city's zoning map first. Outside the city, Collier County's Land Development Code applies.

Sources

The codes, maps, and agency documents cited on this page were checked on November 19, 2026. Codes and city policies change often, so confirm the current version before relying on any detail. This page is general information, not legal advice.

Related reading