City zoning maps

Lee County Zoning Map: How to Look Up Zoning in Unincorporated Lee County, Florida

Where unincorporated Lee County's zoning map and Land Development Code live, what the AG, RS, RM, MH, CN, CC, CG, CT, IL, IG, and planned development labels mean, how county zoning differs from Cape Coral, Fort Myers, and the other four cities, and how the county applies the Live Local Act.

By Nathan Robinson, Founder, Plotzy Published 19 min read

Land in Lee County outside its six cities is zoned by the county under Chapter 34 of the Lee County Land Development Code (LDC). The county uses conventional districts, such as RS-1 or CG, and planned development districts, such as CPD or MPD, whose rules come from an approved master concept plan. Residential density is not set by the district. It comes from the parcel's category in the Lee Plan, the county's comprehensive plan. Here is where to look and how to read what you find.

Where the official map and code live

  • Find My Zoning App: the county's zoning lookup, linked from the Zoning section's page, which also links the Lee County Property Information App and Data Explorer App.
  • Zoning GIS layer: the county's zoning layer, with each parcel's district code, plus separate layers for planned developments and zoning cases. City zoning is shown on separate layers for reference.
  • Land Development Code on Municode (Supplement 3, codified through Ordinance 26-07 of June 16, 2026). Chapter 34, Article VI holds the districts, each group's use regulations table, and its property development regulations table.
  • Official and current zoning maps: under Sec. 34-613, both are part of the code. The current zoning map shows later rezonings, special exceptions, and variances, and it controls if an Official Zoning Map page is in error (Sec. 34-614).
  • The Lee Plan: the comprehensive plan. Rezonings must be consistent with it and its Future Land Use Map (Sec. 34-491).
  • Zoning questions: the Zoning section of the Department of Community Development, 239-533-8329 or OCCSZoning@leegov.com, 1500 Monroe St., Fort Myers. The department's main line is 239-533-8585.
  • Plotzy: Lee County's zoning map and code, loaded parcel by parcel. Search an address to see the parcel's zone next to its owner, lot size, and last sale, or filter a search by zoning. Zoning AI (Production plan and up) answers what the code allows on that parcel, with the section cited. Plotzy is not an official source, so confirm anything a deal depends on with the county. Start a free trial.

The code says no one may rely on either zoning map to vest development rights. Check the zoning resolutions, Hearing Examiner decisions, and administrative approvals for the parcel (Sec. 34-613).

First check: county or a city?

Lee County has six cities: Cape Coral, Fort Myers, Bonita Springs, Estero, Fort Myers Beach, and Sanibel. Each zones its own land under its own code. A mailing address does not tell you which government zones a parcel.

  • Check the county's city limits layer or the Find My Zoning App first. The county's main zoning layer shows county districts; city zoning sits on separate layers.
  • If the parcel is inside Cape Coral, see our Cape Coral zoning guide.
  • Fort Myers, Bonita Springs, Estero, Fort Myers Beach, and Sanibel keep their own maps and codes; contact each city's planning office.
  • Land removed from a city, or returned to the county, is zoned AG-2 until it is rezoned (Sec. 34-616).

How the county's districts are organized

Each district group in Article VI has two tables: a use regulations table and a property development regulations table. The second sets minimum lot size, setbacks, maximum height, and lot coverage. Most conventional districts cap height at 35 feet, with lower limits on Bonita Beach, Captiva, San Carlos Island, Gasparilla Island, Greater Pine Island, and near airports (Sec. 34-2175). Residential density is capped by the Lee Plan category, not the district.

Districts are grouped below into broad categories, and a Plotzy parcel search can be filtered by zoning category. Use counts below come from the use regulations tables in Article VI (Tables 34-653 to 34-903), counted the same way for every district, as described below the tables.

Residential

CodeDistrictLimitsAllowed by rightConditional
RSC-1Residential Single-Family Conservation. Protects older single-family lots; not available for new developments.4,000 sq ft lot, 35-foot height, 45% lot coverage.Single-family home, community residential home, +16 more12 conditional uses
RSC-2Single-family district with added rules in Sec. 33-1626 of Chapter 33.43,560 sq ft lot, 35-foot height, 25% lot coverage.Single-family home, community residential home, +16 more12 conditional uses
RSAResidential single-family on the smallest RS-type lots.6,500 sq ft lot, 35-foot height, 45% lot coverage.Single-family home, accessory dwelling unit, +17 more14 conditional uses
RS-1Residential Single-Family. Detached single-family neighborhoods.7,500 sq ft lot, 35-foot height, 40% lot coverage.Single-family home, accessory dwelling unit, +17 more14 conditional uses
RS-2Residential Single-Family on larger lots.12,500 sq ft lot, 35-foot height, 40% lot coverage.Single-family home, accessory dwelling unit, +17 more14 conditional uses
RS-3Residential Single-Family on half-acre-scale lots.20,000 sq ft lot, 35-foot height, 40% lot coverage.Single-family home, accessory dwelling unit, +17 more14 conditional uses
RS-4Residential Single-Family on acre-scale lots.40,000 sq ft lot, 35-foot height, 40% lot coverage.Single-family home, accessory dwelling unit, +17 more17 conditional uses
RS-5Residential Single-Family, the largest RS lots.2-acre lot, 35-foot height, 40% lot coverage.Single-family home, accessory dwelling unit, +17 more17 conditional uses
TFC-1Residential Two-Family Conservation. Protects older duplex lots; not available for new developments.6,000 sq ft lot, 35-foot height, 45% lot coverage.Duplex, single-family home, +18 more12 conditional uses
TFC-2Residential Two-Family Conservation on larger lots.7,500 sq ft lot, 35-foot height, 40% lot coverage.Duplex, single-family home, +18 more12 conditional uses
TF-1Two-Family. Duplexes, two-family, and single-family homes in future urban areas.7,500 sq ft single-family lot, 10,000 for a duplex, 35-foot height, 45% lot coverage.Duplex, two-family attached, +19 more13 conditional uses
RM-2Multiple-Family. Apartments, townhouses, and duplexes.10,000 sq ft multifamily lot, 6,500 single-family, 35-foot height, 45% lot coverage.Multifamily building, townhouse, +32 more16 conditional uses
RM-3Multiple-Family. The only RM district allowed in nonurban areas.43,500 sq ft multifamily lot, 35-foot height, 45% lot coverage.Multifamily building, townhouse, +31 more16 conditional uses
RM-6Multiple-Family.20,500 sq ft multifamily lot, 35-foot height, 45% lot coverage.Multifamily building, townhouse, +31 more16 conditional uses
RM-8Multiple-Family.15,000 sq ft multifamily lot, 35-foot height, 45% lot coverage.Multifamily building, townhouse, +31 more16 conditional uses
RM-10Multiple-Family.12,000 sq ft multifamily lot, 35-foot height, 45% lot coverage.Multifamily building, townhouse, +31 more16 conditional uses
MHC-1Mobile Home Conservation. Parks built under the 1962 regulations; not available for new developments.2,800 sq ft lot, 25-foot height, 65% lot coverage.Mobile home, single-family home, +16 more14 conditional uses
MHC-2Mobile Home Conservation. Parks built under the 1968 regulations; not available for new developments.7,500 sq ft lot (3,750 on central sewer), 25-foot height, 60% lot coverage.Mobile home, single-family home, +16 more14 conditional uses
MH-1Mobile Home Residential. Mobile home developments in future urban areas.7,500 sq ft lot, 35-foot height, 40% lot coverage.Mobile home, single-family home, +16 more17 conditional uses
MH-2Mobile Home Residential.5,000 sq ft lot, 35-foot height, 40% lot coverage.Mobile home, single-family home, +17 more17 conditional uses
MH-3Mobile Home Residential on larger lots.21,000 sq ft lot, 35-foot height, 40% lot coverage.Mobile home, single-family home, +16 more17 conditional uses
MH-4Mobile Home Residential, the largest lots.40,000 sq ft lot, 35-foot height, 40% lot coverage.Mobile home, single-family home, +16 more19 conditional uses
RV-2Recreational Vehicle Park. Existing RV parks; new or expanded parks need an RVPD.1,200 sq ft RV lot, 35-foot height, 50% lot coverage.Transient RV, permanent RV, +23 more8 conditional uses
RV-3Recreational Vehicle Park on larger lots.2,000 sq ft RV lot, 35-foot height, 40% lot coverage.Transient RV, permanent RV, +23 more8 conditional uses

Ask Plotzy about street, side, rear, and water body setbacks, lot width and depth, accessory dwelling unit rules, and Airport Noise Zone B limits on any residential parcel.

Commercial and office

CodeDistrictLimitsAllowed by rightConditional
C-1ACommercial, 1962 regulations. New rezonings only inside the Mixed-Use Overlay.7,500 sq ft nonresidential lot, 35-foot height, 40% lot coverage.Medical office, multifamily building, +92 more13 conditional uses
C-1Commercial, 1962 regulations. New rezonings only inside the Mixed-Use Overlay.7,500 sq ft nonresidential lot, 35-foot height, 40% lot coverage.Automobile service station, boat sales, +128 more20 conditional uses
C-2Commercial, 1978 regulations, including some industrial uses. New rezonings only inside the Mixed-Use Overlay.10,000 sq ft nonresidential lot, 35-foot height, 40% lot coverage.Automobile repair (Group II), cold storage warehouse, +165 more20 conditional uses
C-2ACommercial. C-2 uses without its industrial uses; applied only by the Board of County Commissioners.10,000 sq ft nonresidential lot, 35-foot height, 40% lot coverage.Automobile repair (Group II), boat sales, +137 more19 conditional uses
CN-1Neighborhood Commercial. Small shops within or next to residential areas.10,000 sq ft lot, 35-foot height, 40% lot coverage.Specialty retail (Group I), day care center, +28 more9 conditional uses
CN-2Neighborhood Commercial. Neighborhood shopping centers.10,000 sq ft lot, 35-foot height, 40% lot coverage.Restaurant (Group I), medical office, +52 more16 conditional uses
CN-3Neighborhood Commercial. Small-scale retail and office at intersections, suited to parts of Lehigh Acres; no convenience stores or fuel pumps.7,500 sq ft interior lot (10,000 corner), 35-foot height, 40% lot coverage.Medical office, restaurant (Group I), +59 more8 conditional uses
CCCommunity Commercial. Community and regional shopping centers.20,000 sq ft lot, 35-foot height, 40% lot coverage.Bank (Group I), medical office, +102 more16 conditional uses
CGGeneral Commercial. Large single-building businesses on arterial roads.20,000 sq ft lot, 35-foot height, 40% lot coverage.Automobile repair (Group II), contractors and builders (Group III), +121 more18 conditional uses
CS-1Special Commercial Office. Offices with limited retail, used as a buffer.20,000 sq ft lot, 35-foot height, 40% lot coverage.Medical office, bank (Group I), +38 more13 conditional uses
CS-2Special Commercial Office. Offices, with many low-impact uses by special exception.5,000 sq ft lot, 35-foot height, 50% lot coverage.Medical office, duplex, +23 more45 conditional uses
CHHighway Commercial. Services for travelers on major highways.10,000 sq ft lot, 35-foot height, 40% lot coverage.Hotel or motel, fast food restaurant, +30 more9 conditional uses
CTTourist Commercial. Lodging and services near beaches and other attractions.20,000 sq ft lot, 35-foot height, 40% lot coverage.Hotel or motel, multifamily building, +69 more18 conditional uses
CRRural Commercial. Limited commercial in nonurban areas.33,600 sq ft interior lot (39,500 corner), 35-foot height, 40% lot coverage.Farm equipment sales and service, plant nursery, +47 more11 conditional uses
CIIntensive Commercial. Warehousing, distribution, and other near-industrial commercial.2-acre lot, 35-foot height, 40% lot coverage.Mini-warehouse, trucking terminal, +46 more3 conditional uses
CPCommercial Parking. Parking that serves a use on another parcel.No minimum lot area, 35-foot height, 40% lot coverage.Accessory parking lot, park-and-ride lot, +7 moreNone
CMMarine Commercial. Commercial marinas and water-dependent uses for boating and fishing.20,000 sq ft lot, 35-foot height, 40% lot coverage.Marina, boat repair and service, +38 more6 conditional uses

Ask Plotzy about street setbacks by road classification, Mixed-Use Overlay standards, consumption on premises rules, and lot width and depth on any commercial parcel.

Mixed use

CodeDistrictLimitsAllowed by rightConditional
MPDMixed-Use Planned Development. A mix of uses meant to cut trips on county roads. See our PUD explainer.Set by the approved master concept plan.Set by the approved plan.Set by the approved plan.

Ask Plotzy about master concept plan conditions, deviations, and Mixed-Use Overlay eligibility on any mixed-use parcel.

Industrial

CodeDistrictLimitsAllowed by rightConditional
ILLight Industrial. Light industry, mostly inside buildings or walled yards.20,000 sq ft lot in an industrial subdivision, 2 acres freestanding, 35-foot height, 40% lot coverage.Electrical machinery manufacturing, contractors and builders (Group III), +102 more19 conditional uses
IGGeneral Industrial. Heavy industry with noise, odor, or fire hazards.20,000 sq ft lot in an industrial subdivision, 2 acres freestanding, 35-foot height, 40% lot coverage.Boat manufacturing, fabricated metal products (Group III), +112 more13 conditional uses
IRRural Industrial. Industry tied to farming in nonurban areas.2-acre lot, 35-foot height, 40% lot coverage.Farm machinery repair, cold storage and processing plant, +37 more5 conditional uses
IMMarine Industrial. Boatbuilding, major repair, and seafood landing.20,000 sq ft lot, 35-foot height, 40% lot coverage.Boatyard, marina, +36 more5 conditional uses
PORTPort. Waterborne commerce, bulk storage, and warehousing.20,000 sq ft lot, 35-foot height, 40% lot coverage.Boatyard, private warehouse, +26 more6 conditional uses

Ask Plotzy about setbacks, industrial subdivision lot rules, office covenants in the Industrial Development category, and outdoor storage screening on any industrial parcel.

Do this in Plotzy

Ask the zoning code a question and get a cited answer

Zoning AI reads the ordinance for you. Ask about permitted uses, setbacks, FAR, height, or parking for a specific parcel and get the answer with the section it came from.

  • Two-level zoning on every parcel, nationwide
  • Plain-English answers with section-level citations
  • Filter parcels by zoning before you spend a day on due diligence
See Zoning AI

Free trial

Agricultural

CodeDistrictLimitsAllowed by rightConditional
AG-1Agricultural. Farming, with homes as an ancillary use.4.7-acre interior lot, 35-foot height, 25% lot coverage.Agriculture, single-family home, +31 more25 conditional uses
AG-2Agricultural. The default district for land that leaves a city.39,500 sq ft interior lot, 35-foot height, 25% lot coverage.Agriculture, single-family home, +31 more27 conditional uses
AG-3Agricultural on smaller lots.20,000 sq ft lot, 35-foot height, 25% lot coverage.Agriculture, single-family home, +28 more25 conditional uses

Ask Plotzy about setbacks, the DR/GR one-unit-per-10-acres limit, agritourism, and animal-keeping rules on any agricultural parcel.

Other districts

CodeDistrictLimitsAllowed by rightConditional
CFCommunity Facilities. Places of worship, schools, government offices, and similar uses.No minimum lot area, 35-foot height, 35% lot coverage.Place of worship, government offices, +40 more10 conditional uses
ECEnvironmentally Critical. Wetlands and other land kept natural.Density set by the Lee Plan; Wetlands allow one unit per 20 acres (Sec. 34-984).Only uses the Lee Plan allows in wetlands, such as fishing and nature study (Sec. 34-983)Special exceptions listed in Sec. 34-983(3)
RPD, MHPD, RVPDResidential, Mobile Home, and Recreational Vehicle Planned Developments.Set by the approved master concept plan.Set by the approved plan.Set by the approved plan.
CPD, IPD, CFPDCommercial, Industrial, and Community Facilities Planned Developments.Set by the approved master concept plan.Set by the approved plan.Set by the approved plan.
AOPD, MEPD, PRFPDAirport Operations, Mine Excavation, and Private Recreational Facilities Planned Developments.Set by the approved plan and Secs. 34-941 and 34-942.Set by the approved plan.Set by the approved plan.
PUDPlanned Unit Development. Older PUDs approved before September 30, 1985; no new applications.Set by the final development plan.Set by the final development plan.Set by the final development plan.

Ask Plotzy about planned development conditions, deviations, community facility setbacks, and wetland density on any of these parcels.

Use counts come from the use regulations tables in Article VI. Each line counts once, including each numbered group of a use (Group I, Group II), so "Restaurant (Group I)" and "Restaurant (Group II)" are two lines. Headings that introduce a list of sub-uses, and lines that only point to another section, are not counted. Allowed by right counts lines marked P. Conditional counts lines marked SE (special exception, decided by the Hearing Examiner), AA (administrative approval), AA/SE, EO/SE, or SE/EO. Lines marked EO (existing only) or TP (temporary permit) are not counted. RM-3, RM-6, RM-8, and RM-10 share one column in Table 34-714, and MHC-1 and MHC-2 share one in Table 34-735. A P use is still limited by the parcel's Lee Plan category (Sec. 34-621). The county's zoning layer showed no parcels zoned RM-3, MHC-1, TFC-1, or IR when checked on November 19, 2026.

Planned development uses are listed in Table 34-934, but a listed use is allowed only when it appears on the approved master concept plan (Sec. 34-933). No parcel of 10 or more acres may be rezoned to a conventional commercial district, except to recognize existing development (Sec. 34-841).

Overlays and special districts

  • Community Plan Areas: Greater Pine Island, Page Park, Caloosahatchee Shores, Lehigh Acres, North Fort Myers, Matlacha, Upper Captiva, North Olga, and the San Carlos Island Overlay District. Each adds the requirements in Chapter 33 (Sec. 34-6).
  • Mixed-Use Overlay: areas on Lee Plan Map 1-C. Properties there may use the alternative "MUO" standards in Tables 34-715 and 34-845, which set no minimum lot area and no lot coverage limit.
  • Airport Compatibility District: airport noise zones, a runway protection zone, and an airport residential and educational facility protection zone (Article VI, Division 12). Many use table notes bar a use in Airport Noise Zone B.
  • Redevelopment Overlay Districts: areas with a county-adopted master site plan (Division 11).
  • Private airport and heliport review zones (Division 10) and other overlays shown on Lee Plan maps.

Zoning verification letters

The Director of Community Development issues zoning verification letters under Sec. 34-626.

  • Submit a written request with the fee by email to OccsZoning@leegov.com, through the eConnect citizen portal, or by mail to the Zoning Counter.
  • Include the property address, the 17-digit STRAP number, and the questions you want answered. For help finding the STRAP, call 239-533-8329.
  • A letter may state the future land use designation, the zoning district, and whether a use is permitted. It may also list the district's uses, the resolutions and variances that apply, the development regulations, the zoning action a use would need, and open code violations.
  • A letter cannot say whether existing development meets code, give legal advice, or authorize development. Its findings cannot be appealed, and it has no expiration date, but later code changes override it.

The county's guide does not state the fee; ask the Zoning section. See our guide to getting a zoning verification letter.

How rezoning works in the county

The county lists these steps:

  1. Application and fee. Unless the applicant files a waiver of statutory deadlines, an application can go through up to three rounds of review before it is deemed complete and scheduled.
  2. Staff review and a written recommendation.
  3. Hearing Examiner public hearing. The applicant presents and answers questions or cross-examination.
  4. Hearing Examiner decision or recommendation. The Hearing Examiner makes the final decision on conventional rezonings and on some planned development amendments. New planned developments go to the Board as a recommendation (Sec. 34-145).
  5. Board of County Commissioners hearing, when required. An applicant for a conventional rezoning can ask for a Board hearing before the Hearing Examiner decides.

Members of the public who want to speak at the Board's final zoning hearing must first testify before the Hearing Examiner. Ex parte contact with commissioners or Hearing Examiners about pending zoning matters is prohibited. The Hearing Examiner also decides variances and special exceptions. See how to rezone a property and how long rezoning takes.

What the Live Local Act means in the county

Florida's Live Local Act requires counties to approve qualifying multifamily and mixed-use rental projects administratively on land zoned commercial, industrial, or mixed use. At least 40 percent of units must stay affordable for 30 years. The county's Live Local page applies it this way:

  • Eligible districts: C-1A, C-1, C-2, C-2A, CN-1, CN-2, CC, CG, CS-1, CS-2, CT, CP, CI, CR, CH, CM, IL, IG, IM, and IR. The commercial, industrial, or mixed-use portions of planned developments also qualify. Land owned by the county, a city, or the school district, and some religious institution land over 3 acres, also qualifies.
  • Not eligible: working waterfronts and certain areas around airports, shown on the county's two exclusion maps.
  • Density: the county's highest standard density is 14 units per acre. The county allows up to 22 units per acre in Future Urban Areas and 14 in Future Suburban and Non-Urban Areas. Projects that meet the county's bonus density rules can also use them.
  • Height: up to the tallest building allowed within one mile, even one approved through a planned development.
  • Other standards: setbacks and other rules follow the RM-2 district, or the MUO standards inside the Mixed-Use Overlay. Mixed-use projects must be at least 65 percent residential.
  • Process: the county's development order process, starting with a required pre-application meeting with Community Development. The applicant files a narrative showing consistency with the statute and a draft land use restriction agreement, which must be signed and recorded before development order approval.

Compare the county's page with the current statute before relying on it.

Future land use and the comprehensive plan

The county's comprehensive plan is the Lee Plan, as amended through December 2025. Its Future Land Use Map, Map 1-A, gives each parcel a category, and Table 1(a) caps residential density for each one. Standard densities run from one unit per 20 acres in Wetlands to 14 units per acre in Intensive Development and General Interchange, with bonus density up to 22. The Commercial and Industrial Development categories do not allow homes other than caretaker residences. Under Sec. 34-491, property may not be rezoned to a district the category does not allow, so a rezoning beyond the category also needs a Lee Plan amendment. See the Lee County future land use map and comprehensive plan guide.

How to check a specific parcel

The quickest check is to search the address in Plotzy, which shows the parcel's zone on a map; Zoning AI answers what the code allows there. To confirm it with the county:

  1. Confirm the parcel is unincorporated in the Find My Zoning App or the county's city limits layer.
  2. Note the district code, then check for a Community Plan Area, the Mixed-Use Overlay, or an airport zone.
  3. Read the use regulations and property development regulations tables for the district in Article VI. For a planned development, pull the zoning resolution and master concept plan.
  4. Check the Lee Plan category, and request a zoning verification letter for anything a deal depends on.

Frequently asked questions

Where is the official Lee County zoning map?

The code names both an Official Zoning Map and a current zoning map, and the current map controls when they conflict. The county publishes its zoning through the Find My Zoning App and its GIS layers.

What does CPD mean in Lee County?

CPD is a Commercial Planned Development. Its uses and standards come from the master concept plan and zoning resolution the county approved for that property.

Does Lee County zoning set density?

No. Residential density comes from the parcel's Lee Plan category in Table 1(a). The zoning district sets lot size, setbacks, height, and lot coverage.

How do I know if my property is in unincorporated Lee County?

Check the county's city limits layer or the Find My Zoning App. Parcels inside Cape Coral, Fort Myers, Bonita Springs, Estero, Fort Myers Beach, or Sanibel follow that city's zoning, not the county's.

Sources

The codes, maps, and agency documents cited on this page were checked on November 19, 2026. Codes and county policies change often, so confirm the current version before relying on any detail. This page is general information, not legal advice.

Related reading